PERSONAL LIGHT(for Front Door) INSPECTION

PROCEDURE

1. INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH

   
   
   1. 

      *a	Component without harness connected (Front Door Inside Handle Illumination Light Assembly LH)

      Apply battery voltage to the connector and check the LED illumination.

      OK
      Measurement Condition Specified Condition Battery positive (+) → Terminal 2 (+) Battery negative (-) → Terminal 1 (-) LED illuminates

      If the result is not as specified, replace the front door inside handle illumination light assembly LH.

2. INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY RH

   
   
   1. 

      *a	Component without harness connected (Front Door Inside Handle Illumination Light Assembly RH)

      Apply battery voltage to the connector and check the LED illumination.

      OK
      Measurement Condition Specified Condition Battery positive (+) → Terminal 2 (+) Battery negative (-) → Terminal 1 (-) LED illuminates

      If the result is not as specified, replace the front door inside handle illumination light assembly RH.

3. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY LH

   
   
   1. 

      *a	Component without harness connected (No. 1 Interior Illumination Light Assembly LH)

      Apply battery voltage to the connector and check the LED illumination.

      OK
      Measurement Condition Specified Condition Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E) LED illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly LH.

4. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH

   
   
   1. 

      *a	Component without harness connected (No. 1 Interior Illumination Light Assembly RH)

      Apply battery voltage to the connector and check the LED illumination.

      OK
      Measurement Condition Specified Condition Battery positive (+) → Terminal 2 (B) Battery negative (-) → Terminal 1 (E) LED illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly RH.