PERSONAL LIGHT(for Front Door) INSPECTION

PROCEDURE


  1. INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH


    1. B001G86E01
      Text in Illustration
      *a

      Component without harness connected

      (Front Door Inside Handle Illumination Light Assembly LH)

      Apply battery voltage to the connector and check the LED illumination.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2 (+B)

      Battery negative (-) → Terminal 1 (GND)

      		 LED illuminates

      If the result is not as specified, replace the front door inside handle illumination light assembly LH.

  2. INSPECT NO. 2 INTERIOR ILLUMINATION LIGHT SUB-ASSEMBLY


    1. A01XE0JE02
      Text in Illustration
      *a

      Component without harness connected

      (No. 2 Interior Illumination Light Sub-assembly)

      Apply battery voltage to the connector and check the LED illumination.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 1 (+B)

      Battery negative (-) → Terminal 2 (GND)

      		 LED illuminates

      If the result is not as specified, replace the No. 2 interior illumination light sub-assembly.