LIGHTING SYSTEM(except 5L-E) CUSTOMIZE PARAMETERS


  1. CUSTOMIZE LIGHTING SYSTEM (INT)

    Note


    • When the customer requests a change in a function, first make sure that the function can be customized.

    • Be sure to make a note of the current settings before customizing.

    • When troubleshooting a function, first make sure that the function is set to the default setting.

    Tech Tips

    The following items can be customized.


    1. Customizing with the GTS


      1. Turn the ignition switch off.

      2. Connect the GTS to the DLC3.

      3. Turn the ignition switch to ON.

      4. Turn the GTS on.

      5. Enter the following menus: Utility / Customize / Illuminated Entry.

      6. Select the setting by referring to the table below.

        Illuminated Entry
        Tester Display Description Description Setting ECU
        Scuff Plate Lamp linked to Entry&Start*1 ON This function turns on the foot light assembly (side step light) when the key is brought within the vehicle exterior detection area. OFF or ON Main body ECU (multiplex network body ECU)
        Scuff Plate Lamp linked to Wireless Key*1 ON This function turns on the foot light assembly (side step light) when the door is unlocked with the wireless key. OFF or ON Main body ECU (multiplex network body ECU)
        Scuff Plate Lamp linked to Door open*1 ON This function turns on the foot light assembly (side step light) when the driver door is opened. OFF or ON Main body ECU (multiplex network body ECU)
        Inside Foot Light*2 ON Turns on the No. 2 interior illumination light assembly (footwell light). OFF or ON Main body ECU (multiplex network body ECU)
        Center Console Spot Light*3 ON Lights up the map light assembly (shift lever illumination) when the ignition switch is turned to ACC or ON. OFF or ON Main body ECU (multiplex network body ECU)
        Lighting Time 15 s

        Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly, No. 1 room light assembly*8 and No. 2 room light assembly*9 is on:


        • Map light assembly

        • Transponder key coil*5

        • No. 1 room light assembly*8

        • No. 2 room light assembly*9

        • Front door inside handle illumination light assembly*6

        • No. 2 interior illumination light sub-assembly (front door pocket light)*6

        • Front door trim board sub-assembly (ornament illumination)*6, *7

        • Rear door inside handle illumination light assembly*6, *7

        • No. 2 interior illumination light sub-assembly (rear door pocket light)*6, *7

        • Rear door trim board sub-assembly (ornament illumination)*6, *7

        • No. 2 interior illumination light assembly (footwell light)*2

        		 30 s, 15 s or 7.5 s Main body ECU (multiplex network body ECU)
        I/L when ACC OFF ON

        Turns off the following lights automatically when the DOOR switch of the map light assembly, No. 1 room light assembly*8 and No. 2 room light assembly*9 is on and the ignition switch is turned from ON or ACC to off:


        • Map light assembly

        • Transponder key coil*5

        • No. 1 room light assembly*8

        • No. 2 room light assembly*9

        • Front door inside handle illumination light assembly*6

        • No. 2 interior illumination light sub-assembly (front door pocket light)*6

        • Front door trim board sub-assembly (ornament illumination)*6, *7

        • Rear door inside handle illumination light assembly*6, *7

        • No. 2 interior illumination light sub-assembly (rear door pocket light)*6, *7

        • Rear door trim board sub-assembly (ornament illumination)*6, *7

        • No. 2 interior illumination light assembly (footwell light)*2

        		 OFF or ON Main body ECU (multiplex network body ECU)
        I/L ON W/Door Key Unlock ON

        Turns on the following lights automatically when the DOOR switch of the map light assembly, No. 1 room light assembly*8 and No. 2 room light assembly*9 is on and the doors are unlocked by an unlock operation (key-linked, wireless or entry unlock function*4):


        • Map light assembly

        • Transponder key coil*5

        • No. 1 room light assembly*8

        • No. 2 room light assembly*9

        • Front door inside handle illumination light assembly*6

        • No. 2 interior illumination light sub-assembly (front door pocket light)*6

        • Front door trim board sub-assembly (ornament illumination)*6, *7

        • Rear door inside handle illumination light assembly*6, *7

        • No. 2 interior illumination light sub-assembly (rear door pocket light)*6, *7

        • Rear door trim board sub-assembly (ornament illumination)*6, *7

        • No. 2 interior illumination light assembly (footwell light)*2

        		 OFF or ON Main body ECU (multiplex network body ECU)
        Room Light when Aprchd*4 ON

        Turns on the following lights when the DOOR switch of the map light assembly, No. 1 room light assembly*8 and No. 2 room light assembly*9 is on and the electrical key transmitter sub-assembly is brought near the vehicle:


        • Map light assembly

        • No. 1 room light assembly*8

        • No. 2 room light assembly*9

        • Front door inside handle illumination light assembly*6

        • No. 2 interior illumination light sub-assembly (front door pocket light)*6

        • Front door trim board sub-assembly (ornament illumination)*6, *7

        • Rear door inside handle illumination light assembly*6, *7

        • No. 2 interior illumination light sub-assembly (rear door pocket light)*6, *7

        • Rear door trim board sub-assembly (ornament illumination)*6, *7

        • No. 2 interior illumination light assembly (footwell light)*2

        		 OFF or ON Main body ECU (multiplex network body ECU)
        Light Control*2 ON

        Dims the following lights when the ignition switch is ON and the shift lever is moved to any position other than P:


        • Front door inside handle illumination light assembly*6

        • No. 2 interior illumination light sub-assembly (front door pocket light)*6

        • Front door trim board sub-assembly (ornament illumination)*6, *7

        • Rear door inside handle illumination light assembly*6, *7

        • No. 2 interior illumination light sub-assembly (rear door pocket light)*6, *7

        • Rear door trim board sub-assembly (ornament illumination)*6, *7

        		 OFF or ON Main body ECU (multiplex network body ECU)
        Interior Light Control ON

        Turns on the following lights when the DOOR switch of the map light assembly, No. 1 room light assembly*8 and No. 2 room light assembly*9 is on and the electrical key transmitter sub-assembly is brought near the vehicle:


        • Map light assembly

        • Transponder key coil*5

        • No. 1 room light assembly*8

        • No. 2 room light assembly*9

        • Front door inside handle illumination light assembly*6

        • No. 2 interior illumination light sub-assembly (front door pocket light)*6

        • Front door trim board sub-assembly (ornament illumination)*6, *7

        • Rear door inside handle illumination light assembly*6, *7

        • No. 2 interior illumination light sub-assembly (rear door pocket light)*6, *7

        • Rear door trim board sub-assembly (ornament illumination)*6, *7

        • No. 2 interior illumination light assembly (footwell light)*2

        		 OFF or ON Main body ECU (multiplex network body ECU)
        Mirr-Foot-Lgt Approached/Exterior Light Approached*10 ON Function that turns on the outer rear view mirror assembly (foot lights) when the vehicle is approached while carrying the key. OFF or ON Main body ECU (multiplex network body ECU)
        Mirr-Foot-Lgt Unlocked/Exterior Light Unlocked*10 ON Function that turns on the outer rear view mirror assembly (foot lights) when a door is unlocked with the electrical key transmitter or door lock switch of a door. OFF or ON Main body ECU (multiplex network body ECU)

        *1: w/ Side Step Light

        *2: w/ Footwell Light

        *3: w/ Shift Lever Illumination Light

        *4: w/ Entry and Start System

        *5: w/o Entry and Start System

        *6: w/ Door Illumination Light

        *7: for 5 Door

        *8: w/o Parsonal Light

        *9: for 3 Door without Pasonal Light

        *10: w/ Door Mirror Foot Light

    2. Customizing using the Multi-display


      1. Turn the ignition switch to ON.

      2. Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Lights Settings.

      3. Select the setting by referring to the table below.

        Light Settings
        Tester Display Default Description Setting ECU
        Interior Light Off Timer 15 sec.

        Changes the lighting time of the following lights that are operated by the timer function when the DOOR switch of the map light assembly, No. 1 room light assembly*1 and No. 2 room light assembly*2 is on:


        • Map light assembly

        • Transponder key coil*3

        • No. 1 room light assembly*1

        • No. 2 room light assembly*2

        • Front door inside handle illumination light assembly*4

        • No. 2 interior illumination light sub-assembly (front door pocket light)*4

        • Front door trim board sub-assembly (ornament illumination)*5

        • Rear door inside handle illumination light assembly*5

        • No. 2 interior illumination light sub-assembly (rear door pocket light)*5

        • Rear door trim board sub-assembly (ornament illumination)*5

        		 Off, 15 sec., 7.5 sec. or 30 sec. Main body ECU (multiplex network body ECU)

        *1: w/o Parsonal Light

        *2: for 3 Door without Pasonal Light

        *3: w/o Entry and Start System

        *4: w/ Door Illumination Light

        *5: for 5 Door with Door Illumination Light