IGNITION KEY CYLINDER LIGHT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL TRANSPONDER KEY AMPLIFIER


    1. B001FVN

      Connect the connector.

    2. Turn the key amplifier as shown in the illustration to attach the 2 claws and install the key amplifier.

    3. Install the cover with the screw.

  2. INSTALL UPPER STEERING COLUMN COVER

    Click here

  3. INSTALL LOWER STEERING COLUMN COVER

    Click here

  4. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY

    Click here

  5. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY

    Click here

  6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ORNAMENT (for LHD)

    Click here

  7. INSTALL INSTRUMENT PANEL FINISH PLATE GARNISH (for RHD)

    Click here

  8. INSTALL INSTRUMENT SIDE PANEL LH

    Click here