SECURITY HORN ASSEMBLY(w/ Built-in Battery type) REMOVAL

PROCEDURE

1. PRECAUTION

   Note

   After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

3. REMOVE REAR NO. 2 SEAT ASSEMBLY

   
   

   1. for Manual Seat Type:

      Click here

   2. for Power Seat Type:

      Click here

   3. for Face to Face Seat Type:

      Click here

4. REMOVE REAR NO. 1 SEATBACK ASSEMBLY

   
   

   1. for 60/40 Split Double-folding Seat Type LH Side:

      Click here

   2. for 60/40 Split Double-folding Seat Type RH Side:

      Click here

5. REMOVE NO. 1 REAR FLOOR STEP COVER (w/ Rear No. 2 Seat)

   Click here

6. REMOVE QUARTER SCUFF PLATE INNER RH

   Click here

7. REMOVE REAR DOOR SCUFF PLATE RH

   Click here

8. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

   Click here

9. REMOVE OUTER LAP BELT ANCHOR COVER

   Click here

10. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)

    Click here

11. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat)

    Click here

12. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat)

    Click here

13. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat)

    Click here

14. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail)

    Click here

15. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail)

    Click here

16. REMOVE REAR FLOOR CARPET ASSEMBLY

    Click here

17. REMOVE REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER

    Click here

18. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK

    Click here

19. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (w/o Tonneau Cover)

    Click here

20. REMOVE FRONT DECK SIDE TRIM COVER RH (w/ Tonneau Cover)

    Click here

21. REMOVE ASSIST GRIP PLUG (w/ Rear No. 2 Seat)

    Click here

22. REMOVE ASSIST GRIP SUB-ASSEMBLY (w/ Rear No. 2 Seat)

    Click here

23. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH

    Click here

24. REMOVE REAR SIDE NO. 2 AIR DUCT

    Click here

25. REMOVE THEFT WARNING SIREN ASSEMBLY (for 5 Door)

    
    

    1. 

       Remove the 2 bolts.

    2. Detach the claw and remove the guide.

    3. Disconnect the connector and remove the theft warning siren assembly.

26. REMOVE REAR SEAT ASSEMBLY (for 3 Door)

    
    

    1. for 60/40 Split Tumble Seat Type LH Side:

       Click here

    2. for 60/40 Split Tumble Seat Type RH Side:

       Click here

27. REMOVE DOOR SCUFF PLATE ASSEMBLY RH (for 3 Door)

    Click here

28. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for 3 Door)

    Click here

29. REMOVE TONNEAU COVER ASSEMBLY (for 3 Door)

    Click here

30. REMOVE MAT SET PLATE COVER (for 3 Door)

    Click here

31. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (for 3 Door)

    Click here

32. REMOVE QUARTER TRIM COVER HOLE (for 3 Door)

    Click here

33. REMOVE REAR FLOOR CARPET ASSEMBLY (for 3 Door)

    Click here

34. REMOVE NO. 1 LUGGAGE COMPARTMENT TRIM HOOK (for 3 Door)

    Click here

35. REMOVE NO. 1 TONNEAU COVER HOLDER CAP (for 3 Door)

    Click here

36. REMOVE FRONT DECK SIDE TRIM COVER (for 3 Door)

    Click here

37. REMOVE QUARTER TRIM POCKET TRAY (for 3 Door)

    Click here

38. REMOVE OUTER LAP BELT ANCHOR COVER (for 3 Door)

    Click here

39. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH (for 3 Door)

    Click here

40. REMOVE THEFT WARNING SIREN ASSEMBLY (for 3 Door)

    
    

    1. 

       Remove the 2 bolts.

    2. Detach the claw and remove the guide.

    3. Disconnect the connector and remove the theft warning siren assembly.