ELECTRICAL KEY OSCILLATOR(for Luggage Compartment) REMOVAL

PROCEDURE

1. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover, for 3 Door)

   Click here

2. REMOVE MAT SET PLATE COVER (for 3 Door)

   Click here

3. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (for 3 Door)

   Click here

4. REMOVE REAR FLOOR CARPET ASSEMBLY (for 3 Door)

   Click here

5. REMOVE REAR NO. 2 SEAT ASSEMBLY (w/ Rear No. 2 Seat, for 5 Door)

   Click here

6. REMOVE TONNEAU COVER ASSEMBLY (w/ Tonneau Cover, for 5 Door)

   Click here

7. REMOVE FRONT LUGGAGE COMPARTMENT TRIM COVER (w/o Rear No. 2 Seat, for 5 Door)

   Click here

8. REMOVE NO. 1 DECK BOARD SUB-ASSEMBLY (w/o Rear No. 2 Seat, for 5 Door)

   Click here

9. REMOVE REAR FLOOR MAT REAR SUPPORT PLATE (w/o Rear No. 2 Seat, for 5 Door)

   Click here

10. REMOVE FLOOR SIDE RAIL LH (w/ Deck Rail, for 5 Door)

    Click here

11. REMOVE FLOOR SIDE RAIL RH (w/ Deck Rail, for 5 Door)

    Click here

12. REMOVE REAR FLOOR CARPET ASSEMBLY (w/o Rear No. 2 Seat, for 5 Door)

    Click here

13. REMOVE INDOOR NO. 3 ELECTRICAL KEY ANTENNA ASSEMBLY

    
    
    1. 

       Text in Illustration

       *A	for 3 Door
       *B	for 5 Door

       Disconnect the connector.

    2. Detach the 2 claws and remove the indoor No. 3 electrical key antenna assembly.