INTRUSION SENSOR REMOVAL

PROCEDURE


  1. REMOVE MAP LIGHT ASSEMBLY

    Click here

  2. REMOVE THEFT WARNING RADAR SENSOR


    1. Disconnect the connector.

    2. A01XICR

      Remove all the tape and the 2 screws.

    3. Detach the clamp and disconnect the central part of the theft warning radar sensor.

    4. A01XLRR

      Using a thin-bladed screwdriver, push the bezel down lightly.

      Tech Tips


      • Perform the same procedure on the other side.

      • Tape the screwdriver tip before use.

    5. A01XL9K

      Insert the thin-bladed screwdriver into the cutout portion of the bezel and remove the bezel from the map light.

      Tech Tips


      • Perform the same procedure on the other side.

      • Tape the screwdriver tip before use.

    6. A01XJ7F

      Disconnect the 2 connectors.

    7. A01XMNQ

      Remove the 2 screws and theft warning radar sensor.

      Tech Tips

      Perform the same procedure on the other side.