THEFT DETERRENT SYSTEM(except 5L-E) DATA LIST / ACTIVE TEST


  1. DATA LIST

    Tech Tips

    Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body / Data List.

    5. According to the display on the GTS, read the Data List.

      Main Body
      Tester Display Measurement Item Range Normal Condition Diagnostic Note
      Key Unlock Warning SW*1 Unlock warning switch signal ON or OFF

      ON: Key in ignition key cylinder

      OFF: No key in ignition key cylinder

      		 -
      ACC SW Ignition switch ON or OFF

      ON: Ignition switch ACC

      OFF: Ignition switch off

      		 "ON" is also displayed for this item when the ignition switch is ON.
      IG SW Ignition switch ON or OFF

      ON: Ignition switch ON

      OFF: Ignition switch off

      		 "OFF" is also displayed for this item when the ignition switch is ACC.
      RR Door Courtesy SW*2 Rear door courtesy light switch RH ON or OFF

      ON: Rear door RH open

      OFF: Rear door RH closed

      		 -
      RL Door Courtesy SW*2 Rear door courtesy light switch LH ON or OFF

      ON: Rear door LH open

      OFF: Rear door LH closed

      		 -
      Back Door Courtesy SW Back door courtesy light switch ON or OFF

      ON: Back door open

      OFF: Back door closed

      		 -
      Back Door Lock Pos SW Back door lock position switch status ON or OFF

      ON: Back door unlocked

      OFF: Back door locked

      		 -
      Glass Hatch Courtesy Switch*3 Glass hatch courtesy switch signal ON or OFF

      ON: Glass hatch open

      OFF: Glass hatch closed

      		 -
      Glass Hatch Opener Switch*3 Glass hatch opener switch signal ON or OFF

      ON: Glass hatch opener switch pushed

      OFF: Glass hatch opener switch not pushed

      		 -
      FR Door Lock Pos Front door RH unlock detection switch LOCK or UNLOCK

      LOCK: Front door RH locked

      UNLOCK: Front door RH unlocked

      		 -
      FR Door Courtesy SW Front door courtesy light switch RH ON or OFF

      ON: Front door RH closed

      OFF: Front door RH open

      		 -
      FL Door Lock Pos Front door LH unlock detection switch LOCK or UNLOCK

      LOCK: Front door LH locked

      UNLOCK: Front door LH unlocked

      		 -
      FL Door Courtesy SW Front door courtesy light switch LH ON or OFF

      ON: Front door LH closed

      OFF: Front door LH open

      		 -
      Hood Courtesy SW Engine hood courtesy switch ON or OFF

      ON: Engine hood closed

      OFF: Engine hood open

      		 -
      RR-Door Lock Pos SW*2 Rear door RH unlock detection switch ON or OFF

      ON: Rear door RH or LH unlocked

      OFF: Rear door RH and LH locked

      		 -
      RL-Door Lock Pos SW*2 Rear door LH unlock detection switch ON or OFF

      ON: Rear door LH or RH unlocked

      OFF: Rear door LH and RH locked

      		 -
      Intrusion Sens OFF SW*4 Intrusion sensor cancel switch ON or OFF

      ON: Intrusion sensor cancel switch on

      OFF: Intrusion sensor cancel switch off

      		 -
      Intrusion Sensor*4 Status of the intrusion and tilt sensor detection ON or OFF

      ON: One of the conditions below is met


      • Moving object detected by sensor

      • Vehicle tilt detected by sensor

      OFF: Both of the conditions below are met


      • No moving object detected by sensor

      • Vehicle tilt not detected by sensor

      		 -
      Intrusion Sen Conn*4 Intrusion and tilt sensor connecting ON or OFF

      ON: Intrusion and tilt sensor connected

      OFF: Intrusion and tilt sensor not connected

      		 -
      Sealed Glas Brak Sen*5 Glass breakage sensor detection With or Without

      With: Glass breakage sensor operating

      Without: Glass breakage sensor not operating

      		 -
      Intrusion Sensor Sound Detect*4, *6 Sound detection status of the intrusion sensor (theft warning ultrasonic sensor) ON or OFF

      ON: Sound detected

      OFF: Sound not detected

      		 Only displays "ON" on the Data List once. When checking again, disconnect and reconnect the GTS.
      Slide Roof Open Warning*7 This function is used to enable or disable the sliding roof open warning ON or OFF Customized value displayed -
      Intrusion Win Opened*1 Setting of the customized item "Intrusion Win Opened" ON or OFF Customized value displayed -
      Security control with mechanism key*8 Setting of the customized item "Security control with mechanism key" ON or OFF Customized value displayed -
      Intrusion Sensor Sound Detection Function*4, *6 Setting of the customized item "Intrusion Sensor Sound Detection Function" ON or OFF Customized value displayed -
      Intrusion Sensor Sensitivity Level*4, *6 Setting of the customized item "Intrusion Sensor Sensitivity Level" Low or Normal Customized value displayed -
      The Number of DTC Number of DTCs 0 to 255 Number of DTCs will be displayed -

      • *1: w/o Entry and Start System

      • *2: for 5 Door

      • *3: w/ Glass Hatch Opener System

      • *4: w/ Intrusion Sensor

      • *5: w/ Glass Breakage Sensor

      • *6: for Arming Preparation State 9 Seconds

      • *7: w/ Sliding Roof System

      • *8: w/ Entry and Start System

  2. ACTIVE TEST

    Tech Tips

    Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. The Data List information can be displayed while performing Active Tests.


    1. Connect the GTS to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the GTS on.

    4. Enter the following menus: Body Electrical / Main Body or Entry&Start / Active Test.

    5. According to the display on the GTS, perform the Active Test.

      Main Body
      Tester Display Test Part Control Range Diagnostic Note
      Security Indicator*1 Security indicator light assembly ON/OFF -
      Security Horn2*2 Theft warning siren assembly ON/OFF -
      Vehicle Horn Vehicle horns ON/OFF -
      Security Horn*3 Security Horn assembly ON/OFF -
      Power For Intrusion Sensor*4 Intrusion and tilt sensor power supply ON/OFF -

      • *1: w/o Entry and Start System

      • *2: w/ Theft Warning Siren

      • *3: w/ Security Horn

      • *4: w/ Intrusion Sensor

      Entry&Start
      Tester Display Test Part Control Range Diagnostic Note
      Immobiliser Indicator* Security indicator light assembly ON/OFF -

      • *: w/ Entry and Start System