INSTALL CUSTOMIZE THEFT DETERRENT SYSTEM
Tech Tips
The following items can be customized.
Note
When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.
Customizing with the GTS.
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Customize Setting / Security.
Select the setting by referring to the table below.
| Display | Default | Content | Setting | Relevant ECU |
|---|---|---|---|---|
| Intrusion Win Opened | OFF | This function is used to enable or disable the window open warning. | ON or OFF | Main body ECU (multiplex network body ECU) |
| Security control with mechanism key*1 | OFF | This function makes it possible to cancel the security alarm with the mechanical key. | ON or OFF | Main body ECU (multiplex network body ECU) |
| Slide Roof Open Warning*2 | ON | This function is used to enable or disable the sliding roof open warning. | ON or OFF | Main body ECU (multiplex network body ECU) |
| Intrusion Sensor Sound Detection Function*3 | ON | Set to detect an intrusion using the sound detection function. | ON or OFF | Main body ECU (multiplex network body ECU) |
| Intrusion Sensor Sensitivity Level*3 | Normal | This function adjusts sensitivity of the sensor that detects intrusions. | Normal or Low | Main body ECU (multiplex network body ECU) |
*1: w/ Entry and Start System
*2: w/ Sliding Roof System
*3: for Arming Preparation State 9 Seconds