THEFT DETERRENT SYSTEM(except 5L-E) SYSTEM DESCRIPTION


  1. OUTLINE OF THEFT DETERRENT SYSTEM


    • The theft deterrent system can be set by locking the doors using any of the following operations:


      • Entry lock operation

      • Wireless lock operation

        Tech Tips

        w/ Entry and Start System w/o Entry and Start System
        Entry lock operation -
        Wireless lock operation

        • ○: Available

        • -: Not Available

    • In the armed state, the alarm function will be activated if one of the following conditions is met:


      • Any of the doors are unlocked.

      • Any of the doors, the engine hood or the glass hatch*1 is opened.

      • The intrusion sensor (theft warning ultrasonic sensor) detects movement inside the cabin.*2

      • The tilt sensor (theft warning ultrasonic sensor) detects that the vehicle is tilted.*2


        • *1: w/ Glass Hatch Opener System

        • *2: w/ Intrusion Sensor

    • In the alarm sounding state, the system blinks the turn signal lights. At the same time, the system sounds the vehicle horns and security horn assembly*1 or theft warning siren assembly*2 to deter break-in and theft as well as to warn people around the vehicle.


      • *1: w/ Security Horn

      • *2: w/ Theft Warning Siren

    • The theft deterrent system can be canceled by unlocking the doors using the following operation:


      • Entry unlock operation

      • Wireless unlock operation

      • Key linked unlock operation

        Tech Tips

        w/ Entry and Start System w/o Entry and Start System
        Entry unlock operation -
        Wireless unlock operation
        Key linked unlock operation

        -

        (○)*

        -

        *: This function is set through the customize function.

        Click here


        • ○: Available

        • -: Not Available

    • The theft deterrent system has an active arming mode. There are 4 states in this mode: a disarmed state, an arming preparation state, an armed state and an alarm sounding state.


    1. Disarmed state:


      • The alarm function is not operating.

      • The theft deterrent system is not operating.

    2. Arming preparation state:


      • The time until the system goes into the armed state.

      • The theft deterrent system is not operating.

    3. Armed state:


      • The theft deterrent system is operating.

    4. Alarm sounding state:


      • The alarm function is operating.

      Alarm Methods
      Alarm Method Turn Signal Lights Blinking
      Vehicle Horns

      Sounding

      (approximately 0.4-second cycles)

      Security Horn Assembly*1 Sounding (approximately 0.4-second cycles)
      Theft Warning Siren Assembly*2 Sounding

*1: w/ Security Horn

*2: w/ Theft Warning Siren

  • FUNCTION OF MAIN COMPONENTS

    Component Function
    Security indicator light Informs driver of theft deterrent system status.
    Security horn assembly*1 Sounds when attempted break-in or theft is detected.
    Theft warning siren assembly*2 Sounds when attempted break-in or theft is detected.
    Turn signal lights Blink when attempted break-in or theft is detected.
    Vehicle horns Sound when attempted break-in or theft is detected.
    Door courtesy light switch Detects door status (open or closed).
    Door unlock detection switch Detects door status (locked or unlocked).
    Hood lock assembly (engine hood courtesy switch) Detects engine hood status (open or closed).
    Back door courtesy light switch Detects back door status (open or closed).
    Back window lock assembly (glass hatch courtesy switch)*3 Detects glass hatch status (open or closed).
    Intrusion sensor cancel switch*4
    • Sends a signal to the main body ECU (multiplex network body ECU) to cancel the intrusion sensor (theft warning ultrasonic sensor).

    • Sends a signal to the main body ECU (multiplex network body ECU) to cancel the tilt sensor (theft warning ultrasonic sensor).

    Intrusion sensor (theft warning ultrasonic sensor)*4 Sends a signal to the main body ECU (multiplex network body ECU) to sound the alarm when detecting an intrusion.
    The tilt sensor(theft warning ultrasonic sensor)*4 Sends a signal to the main body ECU (multiplex network body ECU) to sound the alarm when detecting a change in the pitch angle of the vehicle inclination.
    Certification ECU (smart key ECU assembly)*5
    • Receives wireless door lock/unlock signal.

    • Receives entry door lock/unlock signal.

    Main body ECU (multiplex network body ECU)*6 Receives wireless door lock/unlock signal.
    Glass breakage sensor*7 Sends a signal to the main body ECU (multiplex network body ECU) to sound the alarm when detecting breakage of quarter window assembly RH/LH or back door glass.

    *1: w/ Security Horn

    *2: w/ Theft Warning Siren

    *3: w/ Glass Hatch Opener System

    *4: w/ Intrusion Sensor

    *5: w/ Entry and Start System

    *6: w/o Entry and Start System

    *7: w/ Glass Breakage Sensor

  • ACTIVE ARMING MODE


    1. Active arming mode:

      This system operates as described in the diagram below when one of the items for each condition is met.

      Tech Tips

      The term "all doors" used in this section refers to the driver door, front passenger door, rear door LH*, rear door RH* and back door.


      • *: for 5 Door

      B001GIWE20
      w/ Entry and Start System
      Condition Item
      Condition [1]

      In disarmed state 1, when the engine switch is off, the system state is switched if the following condition is met:


      • With all doors, the engine hood and the glass hatch*4 closed, all doors are locked by wireless operation or entry operation.

      Condition [2]
      • Allow approximately 30 seconds to elapse.*1

      • Allow approximately 9 seconds to elapse.*2

      Condition [3]

      One of the following conditions is met:


      • All doors are unlocked by wireless operation or entry operation.

      • Any door is unlocked.

      • Any door is opened.

      • The engine switch is pushed.

      • The engine switch is turned on (ACC) or on (IG).

      • The battery is reconnected.*3

      Condition [4]

      One of the following conditions is met:


      • The engine hood is opened when the engine hood is closed.

      • The glass hatch is opened when the glass hatch is closed.*4

      • The intrusion sensor (theft warning ultrasonic sensor) detects movement within the vehicle.*5

      • The tilt sensor(theft warning ultrasonic sensor) detects a change in the pitch angle of the vehicle inclination.*5

      • The glass breakage sensor detects that glass is broken.*6

      • Any door is opened when all doors are closed.

      • Any door is unlocked when all doors are locked not by wireless operation or entry operation.

      • When 5 seconds or more have elapsed after the engine switch is pressed, the power source mode is changed from off to on (IG) without pressing the engine switch.

      • The battery is reconnected when the engine hood is open, the glass hatch is open*4, any door is open or any door is unlock.

      • The engine hood is opened.

      • The glass hatch is opened.*4

      • Any door is unlocked.

      Note

      Ultrasonic waves are used to detect intrusion. Ultrasonic waves do not penetrate steel or glass. When any of the door windows is left open, ultrasonic waves may escape. This may result in the detection of people in the surroundings, leaves or insects entering the vehicle, strong wind or other ultrasonic wave sources in the environment when the vehicle is parked with the door windows open. When parking the vehicle with the door windows open for ventilation, turn off the intrusion sensor (theft warning ultrasonic sensor) using the intrusion sensor cancel switch.*5

      Condition [5]

      One of the following conditions is met:


      • The engine switch is turned on (IG) and the engine is running at 550 rpm for 2 seconds or more.

      • All doors are unlocked by wireless operation or entry operation.

      • The engine switch is turned on (ACC) or on (IG) within 5 seconds after the engine switch is pushed.

      Condition [6]
      • After approximately 27.5 seconds, the alarm stops and 5 seconds later the system returns to the armed state.

      Condition [7]
      • The glass hatch is opened by wireless operation or entry operation.*4

      Condition [8]

      One of the following conditions is met:


      • The engine hood is closed with all doors and the glass hatch*4 closed.

      • The glass hatch is closed with the engine hood and all doors closed.*4

      Condition [9]

      One of the following conditions is met:


      • Any door is unlocked when all doors are locked.

      • Any door is opened.

      • The engine switch is pushed.

      • The engine switch is turned on (ACC) or on (IG).

      • The battery is reconnected.*3

      • All doors are unlocked by wireless operation or entry operation.

      Condition [10]

      In disarmed state 1, when the engine switch is off, the system state is switched if the following condition is met:


      • With all doors and the glass hatch*4 closed and the engine hood open, all doors are locked by wireless operation or entry operation.

      • With all doors and the engine hood closed and the glass hatch open, all doors are locked by wireless operation or entry operation.*4

      Condition [11]

      One of the following conditions is met:


      • The engine hood is opened.

      • The glass hatch is opened.*4

      *1: for Arming Preparation State 30 Seconds

      *2: for Arming Preparation State 9 Seconds

      *3: w/o Door Control Battery

      *4: w/ Glass Hatch Opener System

      *5: w/ Intrusion Sensor

      *6: w/ Glass Breakage Sensor

      w/o Entry and Start System
      Condition Item
      Condition [1]

      In disarmed state 1, when the ignition switch is off, the system state is switched if the following condition is met when the key is not in the key cylinder:


      • With all doors and the engine hood and the glass hatch*2 closed, all doors are locked by wireless operation.

      Condition [2]
      • Allow approximately 30 seconds to elapse.

      Condition [3]

      One of the following conditions is met:


      • All doors are unlocked by wireless operation.

      • Any door is unlocked.

      • Any door is opened.

      • Key is in the key cylinder.

      • The ignition switch is turned to ACC or ON.

      • The battery is reconnected.*1

      Condition [4]

      One of the following conditions is met:


      • The engine hood is opened when the engine hood is closed.

      • The glass hatch is opened when the glass hatch is closed.*2

      • The intrusion sensor (theft warning ultrasonic sensor) detects movement within the vehicle.*3

      • The tilt sensor(theft warning ultrasonic sensor) detects a change in the pitch angle of the vehicle inclination.*3

      • The glass breakage sensor detects that glass is broken.*4

      • Any door is opened when all doors are closed.

      • Any door is unlocked when all doors are locked not by wireless operation.

      • The ignition switch is turned to ON when the key is not in the key cylinder.

      • The battery is reconnected when the engine hood is open, the glass hatch is open*2, any door is open or any door is unlock.

      • The engine hood is opened.

      • The glass hatch is opened.*2

      • Any door is unlocked.

      Note

      Ultrasonic waves are used to detect intrusion. Ultrasonic waves do not penetrate steel or glass. When any of the door windows is left open, ultrasonic waves may escape. This may result in the detection of people in the surroundings, leaves or insects entering the vehicle, strong wind or other ultrasonic wave sources in the environment when the vehicle is parked with the door windows open. When parking the vehicle with the door windows open for ventilation, turn off the intrusion sensor (theft warning ultrasonic sensor) using the intrusion sensor cancel switch.

      Condition [5]

      One of the following conditions is met:


      • The ignition switch is turned to ON and the engine is running at 550 rpm for 2 seconds or more.

      • All doors are unlocked by wireless operation.

      Condition [6]
      • After approximately 27.5 seconds, the alarm stops and 5 seconds later the system returns to the armed state.

      Condition [7]
      • The glass hatch is opened by wireless operation.*2

      Condition [8]

      One of the following conditions is met:


      • The engine hood is closed with all the doors and the glass hatch*2 closed.

      • The glass hatch is closed with engine hood and all doors closed.*2

      Condition [9]

      One of the following conditions is met:


      • Any door is unlocked when all doors are locked.

      • Any door is opened.

      • Key is in the key cylinder.

      • The ignition switch is turned to ACC or ON.

      • The battery is reconnected.*1

      • All doors are unlocked by wireless operation.

      Condition [10]

      In disarmed state 1, when the ignition switch is off, the system state is switched if the following condition is met when the key is not in the key cylinder:


      • With all doors and the glass hatch*2 closed and the engine hood open, all doors are locked by wireless operation.

      • With all doors and the engine hood closed and the glass hatch open, all doors are locked by wireless operation.

      Condition [11]

      One of the following conditions is met:


      • The engine hood is opened.

      • The glass hatch is opened.*2

      *1: w/o Door Control Battery

      *2: w/ Glass Hatch Opener System

      *3: w/ Intrusion Sensor

      *4: w/ Glass Breakage Sensor

  • FORCED DOOR LOCK CONTROL


    1. The forced door lock control prevents the vehicle from being tampered with. Immediately after a door is unlocked (armed state), all doors are forced to lock by a forced door lock signal.


      1. If the following conditions are met, the forced door lock control is operated.


        • The theft deterrent system is in the armed state.

        • Any door is unlocked.

  • INTRUSION SENSOR (THEFT WARNING ULTRASONIC SENSOR) (w/ Intrusion Sensor)

    Note

    Ultrasonic waves are used to detect intrusion. Ultrasonic waves do not penetrate steel or glass. When any of the door windows is left open, ultrasonic waves may escape. This may result in the detection of people in the surroundings, leaves or insects entering the vehicle, strong wind or other ultrasonic wave sources in the environment when the vehicle is parked with the door windows open. When parking the vehicle with the door windows open for ventilation, turn off the intrusion sensor (theft warning ultrasonic sensor) using the intrusion sensor cancel switch.


    1. An intrusion sensor (theft warning ultrasonic sensor) is provided in the map light assembly located in the front of the vehicle interior.

    2. The main body ECU (multiplex network body ECU) activates the intrusion sensor (theft warning ultrasonic sensor) when the system changes from the disarmed state to the armed preparation state. If an intrusion detection signal is input from the intrusion sensor (theft warning ultrasonic sensor) during the armed state, the main body ECU (multiplex network body ECU) changes to the alarm sounding state in order to output an alarm.

    3. When the system is in the disarmed state, the function of the intrusion sensor (theft warning ultrasonic sensor) can be disabled by pressing the intrusion sensor cancel switch.

    4. The intrusion sensor (theft warning ultrasonic sensor) may erroneously detect intrusion in the following states:


      • Persons or pets are in the vehicle.

      • The vehicle is parked in a place where extreme vibrations or noises occur, such as in a parking garage.

      • Ice or snow is removed from the vehicle, causing the vehicle to receive repeated impacts or vibrations.

      • The wind or something similar causes an externally mounted reflectively coated windshield cover to move.

      • The intrusion sensor (theft warning ultrasonic sensor) may react to a hanger or other objects hanging in the cabin when they drop or swing.

      • The system changes to the armed state even when any of the windows is open. The intrusion sensor (theft warning ultrasonic sensor) may react to objects moving outside the vehicle when any of the windows is open.

      • The vehicle is inside an automatic or high-pressure car wash.

      • The vehicle experiences impacts, such as hail, lightning strikes and other kinds of repeated impacts or vibrations.

  • TILT SENSOR (THEFT WARNING ULTRASONIC SENSOR) (w/ Intrusion Sensor)


    1. The tilt sensor (theft warning ultrasonic sensor) detects the pitch angle of vehicle inclination using 2 deceleration sensors. When the tilt sensor (theft warning ultrasonic sensor) detects a change in the pitch angle of vehicle inclination, such as a thief attempting to tow the vehicle, it transmits the warning signal to the main body ECU (multiplex network body ECU).

    2. The main body ECU (multiplex network body ECU) activates the tilt sensor (theft warning ultrasonic sensor) when the system changes from the armed preparation state to the armed state. If a warning signal is received from the tilt sensor (theft warning ultrasonic sensor) when in the armed state, the main body ECU (multiplex network body ECU) changes to the alarm sounding state in order to sound the alarm.

    3. When the system is in the disarmed state, pressing the intrusion sensor cancel switch disables the function of the tilt sensor (theft warning ultrasonic sensor). If the system changes to the armed state, the tilt sensor (theft warning ultrasonic sensor) will not activate. This function is canceled each time all doors are unlocked by the wireless operation or entry and start system*, and is reinstated when the tilt sensor (theft warning ultrasonic sensor) is on.


      • *: w/ Entry and Start System

    4. Under the following conditions, if the vehicle tilts or acceleration in the vertical or horizontal direction is detected by the tilt sensor (theft warning ultrasonic sensor), the alarm may activate accidentally. To avoid accidental alarm activation, turn the tilt sensor (theft warning ultrasonic sensor) off using the intrusion sensor cancel switch.


      • The vehicle is transported by a ferry, trailer or train.

      • The vehicle is parked in a multi-story parking facility.

      • The vehicle is washed by a conveyor type car washing machine.

      • A tire blows out.

      • The vehicle is jacked up for a tire or wheel change.

      • An earthquake occurs or the road subsides.

      • Goods such as skis or snowboards are loaded or unloaded.

  • THEFT WARNING SIREN ASSEMBLY (w/ Theft Warning Siren)


    1. The theft warning siren assembly has an internal battery. If power to the theft warning siren assembly is interrupted or the communication line is open, the theft warning siren assembly detects it and sounds the alarm using the internal battery.

    2. The theft warning siren assembly has the following alarm controls: normal alarm control and open circuit alarm control. Under normal alarm control, the alarm sounds based on instructions from the main body ECU (multiplex network body ECU) whereas under open circuit alarm control, the theft warning siren assembly judges current security conditions and sounds the alarm by itself.


      1. Normal alarm control

        The theft warning siren assembly sounds when the theft deterrent system is in the alarm sounding state and does not sound when the system is not in the alarm sounding state.

        Tech Tips

        If communication interruption between the theft warning siren assembly and main body ECU (multiplex network body ECU) continues for 70 seconds or more while the theft deterrent system is in the alarm sounding state, the theft warning siren assembly stops sounding.

      2. B001FC0E02

        Open circuit alarm control

        The theft warning siren assembly changes between the disarmed state and armed state in accordance with the theft deterrent system changes between the disarmed state and armed state. If the power source, ground or communication line is open while the theft warning siren assembly is in the armed state, the theft warning siren assembly sounds.

        During the open circuit alarm sounding state, the theft warning siren assembly sounds intermittently for 28 seconds and then stops for 5 seconds. This pattern repeats a maximum of 9 times.

        The intermittent sounding will stop when either condition is met:

        1. The theft warning siren assembly changes to the disarmed state.

        2. The open circuit is returned to normal.

        B001FWEE06
  • SECURITY INDICATOR LIGHT OUTPUT


    1. According to the state of the theft deterrent system, the main body ECU (multiplex network body ECU) outputs a signal to turn the security indicator light on. However, some of the actual lighting conditions of the security indicator light are different from the output signals of the main body ECU (multiplex network body ECU).

      Output
      State of Theft Deterrent System Security Indicator Light
      Output Signal from Main Body ECU (Multiplex Network Body ECU) Actual Lighting Condition
      Disarmed state (1), (2) Off
      • Off (Immobiliser function unset)

      • Blinking (Immobiliser function set)

      Arming preparation state On On
      Armed state Off Blinking
      Alarm sounding state On On
      Blinking Cycle
      Time Security Indicator Light
      0.125 seconds On
      1.875 seconds Off

      Tech Tips

      When the immobiliser function is set, the security indicator light blinks during both the disarmed state and the armed state due to output signals from the immobiliser function.


  • CHECK INTRUSION SENSOR (THEFT WARNING ULTRASONIC SENSOR) (w/ Intrusion Sensor) (for Arming Preparation State 30 Seconds)


    1. Check that the engine hood and the glass hatch*1 is closed.

    2. Check the intrusion sensor (theft warning ultrasonic sensor) operation.


      1. Turn the ignition switch off.

      2. Lock all the doors using the wireless door lock or entry door lock*2 function and check that the security indicator light illuminates (armed preparation state) (all windows need to be opened).

      3. Wait 30 seconds after locking all the doors using the wireless door lock or entry door lock*2 function and check that the security indicator light blinks (armed state). Then, check that the theft deterrent system alarm operates due to movement inside the vehicle.

        Tech Tips

        If the electrical key transmitter is within the entry exterior area at this time, the alarm does not operate due to the intrusion sensor.*2

      4. Perform an unlock operation using the wireless or entry*2 operation to stop the alarm.

  • CHECK INTRUSION SENSOR (THEFT WARNING ULTRASONIC SENSOR) (w/ Intrusion Sensor) (for Arming Preparation State 9 Seconds)

    Note

    Perform the intrusion sensor (theft warning ultrasonic sensor) operation inspection with the GTS disconnected.


    1. Check that the engine hood and the glass hatch* is closed.


      • *: w/ Glass Hatch Opener System

    2. Check the intrusion sensor (theft warning ultrasonic sensor) operation (customize setting "Intrusion Sensor Sound Detection Function" is "ON").


      1. Turn the ignition switch off.

      2. Lock all the doors using the wireless door lock or entry door lock function and check that the security indicator light illuminates (armed preparation state) (all windows need to be closed).

      3. Wait 30 seconds after locking all the doors using the wireless door lock or entry door lock function and check that the security indicator light blinks (armed state). Then, make a loud sound by hitting metal objects together (jangle a bunch of keys, etc.) near the intrusion sensor (theft warning ultrasonic sensor) in the vehicle and check that the theft deterrent system alarm operates due to movement inside the vehicle.

        Tech Tips

        If the electrical key transmitter is within the entry exterior area at this time, the alarm does not operate due to the intrusion sensor (theft warning ultrasonic sensor).

      4. Perform an unlock operation using the wireless or entry operation to stop the alarm.

    3. Check the intrusion sensor (theft warning ultrasonic sensor) operation (customize setting "Intrusion Sensor Sound Detection Function" is "OFF").


      1. Turn the ignition switch off.

      2. Lock all the doors using the wireless door lock or entry door lock function and check that the security indicator light illuminates (armed preparation state) (all windows need to be opened).

      3. Wait 30 seconds after locking all the doors using the wireless door lock or entry door lock function and check that the security indicator light blinks (armed state). Then, check that the theft deterrent system alarm operates due to movement inside the vehicle.

        Tech Tips

        If the electrical key transmitter is within the entry exterior area at this time, the alarm does not operate due to the intrusion sensor.

      4. Perform an unlock operation using the wireless or entry operation to stop the alarm.


  • CHECK INTRUSION SENSOR OFF SWITCH (w/ Intrusion Sensor) (for Arming Preparation State 30 Seconds)


    1. Check that the engine hood and the glass hatch*1 is closed.

    2. Check the intrusion sensor OFF switch operation.


      1. Turn the ignition switch off.

      2. Press the intrusion sensor OFF switch and check that "Theft sensor turned OFF" is displayed on the combination meter.

      3. Lock all the doors using the wireless door lock or entry door lock*2 function and check that the security indicator light illuminates (armed preparation state).

      4. Approximately 30 seconds after locking all the doors via wireless operation or entry operation*2, check that the security indicator light changes to blinking (armed state) and the auto alarm does not operate according to movement in the cabin. At this time, do not bring the electrical key transmitter assembly close to the entry exterior area*2.

        Tech Tips

        Even if the intrusion and tilt sensor (theft warning ultrasonic sensor) is off, the theft deterrent system is in the armed state. Therefore, if any of the doors is manually unlocked, the alarm operates.

  • CHECK INTRUSION SENSOR OFF SWITCH (w/ Intrusion) (for Arming Preparation State 9 Seconds)

    Note

    Perform the intrusion sensor (theft warning ultrasonic sensor) operation inspection with the GTS disconnected.


    1. Check that the engine hood and the glass hatch* is closed.


      • *: w/ Glass Hatch Opener System

    2. Check the intrusion sensor OFF switch operation (customize setting "Intrusion Sensor Sound Detection Function" is "ON").


      1. Turn the ignition switch off.

      2. Press the intrusion sensor OFF switch and check that "Theft sensor turned OFF" is displayed on the combination meter.

      3. Lock all the doors using the wireless door lock or entry door lock function and check that the security indicator light illuminates (armed preparation state).

      4. Approximately 9 seconds after locking all the doors via wireless operation or smart operation, check that the security indicator light changes to blinking (armed state). Also, after making a metal-on-metal striking sound (such as by shaking keys) near the sensor, check that the auto alarm warning does not operate according to movement in the cabin. At this time, do not bring the electrical key transmitter sub-assembly close to the entry exterior area.

        Tech Tips

        Even if the intrusion sensor (theft warning ultrasonic sensor) is off, the theft deterrent system is in the armed state. Therefore, if any of the doors is manually unlocked, the alarm operates.

    3. Check the intrusion sensor OFF switch operation (customize setting "Intrusion Sensor Sound Detection Function" is "OFF").


      1. Turn the engine switch off.

      2. Press the intrusion sensor OFF switch and check that "Theft sensor OFF" is displayed on the combination meter.

      3. Lock all the doors using the wireless door lock or entry door lock function and check that the security indicator light illuminates (armed preparation state).

      4. Approximately 9 seconds after locking all the doors via wireless operation or smart operation, check that the security indicator light changes to blinking (armed state) and the auto alarm does not operate according to movement in the cabin. At this time, do not bring the electrical key transmitter sub-assembly close to the entry exterior area.

        Tech Tips

        Even if the intrusion sensor (theft warning ultrasonic sensor) is off, the theft deterrent system is in the armed state. Therefore, if any of the doors is manually unlocked, the alarm operates.

  • CHECK GLASS BREAKAGE SENSOR (w/ Glass Breakage Sensor)



    1. Check quarter window assembly RH (glass breakage sensor)*4


      1. Turn the ignition switch off.

      2. Close all the doors, engine hood and glass hatch*1.

      3. B001DZ6C01
        *1 Map Light Assembly
        *a Intrusion Sensor (Theft Warning Ultrasonic Sensor)
        *b Tape

        Cover the 2 intrusion sensors (theft warning ultrasonic sensor) in the map light assembly with tape.

      4. Lock all the doors using the wireless door lock or entry door lock*2 function and check that the security indicator light illuminates (armed preparation state).

      5. Approximately 30 seconds after locking all the doors via wireless operation or entry operation*2, check that the security indicator light changes to blinking (armed state).

      6. Disconnect the Q20 quarter window assembly RH (glass breakage sensor) connector and check that the theft deterrent system alarm operates.

        Note

        Be sure that the R25 quarter window assembly LH (glass breakage sensor) connector and the Y2*1 or X8*3 back door glass (glass breakage sensor) connector are connected.

      7. Perform an unlock operation using the wireless or entry*2 operation to stop the alarm.

    2. Check quarter window assembly LH (glass breakage sensor)*4


      1. Turn the ignition switch off.

      2. Close all the doors and engine hood.

      3. B001DZ6C01
        *1 Map Light Assembly
        *a Intrusion Sensor (Theft Warning Ultrasonic Sensor)
        *b Tape

        Cover the 2 intrusion sensors (theft warning ultrasonic sensor) in the map light assembly with tape.

      4. Lock all the doors using the wireless door lock or entry door lock*2 function and check that the security indicator light illuminates (armed preparation state).

      5. Approximately 30 seconds after locking all the doors via wireless operation or entry operation*2, check that the security indicator light changes to blinking (armed state).

      6. Disconnect the R25 quarter window assembly LH (glass breakage sensor) connector and check that the theft deterrent system alarm operates.

        Note

        Be sure that the Q20 quarter window assembly RH (glass breakage sensor) connector and the Y2*1 or X8*3 back door glass (glass breakage sensor) connector are connected.

      7. Perform an unlock operation using the wireless or entry*2 operation to stop the alarm.

    3. Check back door glass (glass breakage sensor)


      1. Turn the ignition switch off.

      2. Close all the doors and engine hood.

      3. B001DZ6C01
        *1 Map Light Assembly
        *a Intrusion Sensor (Theft Warning Ultrasonic Sensor)
        *b Tape

        Cover the 2 intrusion sensors (theft warning ultrasonic sensor) in the map light assembly with tape.

      4. Lock all the doors using the wireless door lock or entry door lock*2 function and check that the security indicator light illuminates (armed preparation state).

      5. Approximately 30 seconds after locking all the doors via wireless operation or entry operation*2, check that the security indicator light changes to blinking (armed state).

      6. Disconnect the Y2*1 or X8*3 back door glass (glass breakage sensor) connector and check that the theft deterrent system alarm operates.

        Note

        Be sure that the Q20 quarter window assembly RH (glass breakage sensor) and the R25 quarter window assembly LH (glass breakage sensor) are connected.*4

      7. Perform an unlock operation using the wireless or entry*2 operation to stop the alarm.