THEFT DETERRENT SYSTEM(except 5L-E), Diagnostic DTC:B2761

DTC Code DTC Name
B2761 Intrusion Sensor Internal Circuit Malfunction

DESCRIPTION

The intrusion and tilt sensor (theft warning ultrasonic sensor) conducts self-diagnosis immediately after power is supplied to the sensor (when the theft deterrent system is set).

If a problem is detected in the signals transmitted and received by the intrusion and tilt sensor (theft warning ultrasonic sensor), or if the transmission or reception circuits malfunction, the intrusion and tilt sensor (theft warning ultrasonic sensor) transmits a signal to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then stores this DTC.

DTC Code Detection Item DTC Detection Condition Trouble Area
B2761 Intrusion Sensor Internal Circuit Malfunction Intrusion and tilt sensor (theft warning ultrasonic sensor) outputs signal for sensor malfunction Intrusion and tilt sensor (theft warning ultrasonic sensor)

PROCEDURE


  1. REPLACE INTRUSION AND TILT SENSOR (THEFT WARNING ULTRASONIC SENSOR)


    1. Temporarily replace the intrusion and tilt sensor (theft warning ultrasonic sensor) with a new or normally functioning one.

      Click here

      Result
      Proceed to
      NEXT

    NEXT

    END (INTRUSION AND TILT SENSOR (THEFT WARNING ULTRASONIC SENSOR) WAS DEFECTIVE)