DOOR CONTROL BATTERY(for RHD) REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work.

    Click here

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

    Click here

  3. REMOVE FRONT AIR CONDITIONING UNIT

    Click here

  4. REMOVE DOOR CONTROL BATTERY


    1. B001GMIC01
      B001CHY Nut
      B001DEF Connector

      Remove the 2 nuts and door control battery.

    2. Disconnect the connector.