READ DATA LIST
Tech Tips
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / (desired system) / Data List.
According to the display on the intelligent tester, read the Data List.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| D-Door Touch Sensor | Driver side door unlock sensor / ON or OFF | ON: Driver side door unlock sensor touched OFF: Driver side door unlock sensor not touched |
- |
| P-Door Touch Sensor | Front passenger side door unlock sensor / ON or OFF | ON: Front passenger side door unlock sensor touched OFF: Front passenger side door unlock sensor not touched |
- |
| D-Door Trigger Switch | Driver side door lock sensor / ON or OFF | ON: Driver side door lock sensor touched OFF: Driver side door lock sensor not touched |
- |
| P-Door Trigger Switch | Front passenger side door lock sensor / ON or OFF | ON: Front passenger side door lock sensor touched OFF: Front passenger side door lock sensor not touched |
- |
| Tr/B-Door Lock SW | Back door lock switch / ON or OFF | ON: Back door lock switch pushed OFF: Back door lock switch not pushed |
- |
| Tr/B-Door Unlock SW | Back door unlock switch / ON or OFF | ON: Back door unlock switch pushed OFF: Back door unlock switch not pushed |
- |
| Ignition Switch | Engine switch on (IG) / ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off |
- |
| Unmatched Vehicle-ID | No communication condition between vehicle and electrical key transmitter (vehicle-ID) / Yes or No | Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle |
- |
| No Response | No communication condition between vehicle and electrical key transmitter (response) / Yes or No | Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle |
- |
| Unmatch Code or Form | No communication condition between vehicle and electrical key transmitter (response code and format) / Yes or No | Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle |
- |
| Key Low Battery | Key low battery / Yes or No | Yes: Key battery voltage low No: Key battery voltage normal |
- |
| Power Save Cnt 10 Min | Power save counter - 10 minutes / Min: 0, Max: 225 | Within range of 0 to 225 | - |
| Power Save Cnt 5 Days | Power save counter - 5 days / Min: 0, Max: 225 | Within range of 0 to 225 | - |
| Power Save Cnt 14 Days | Power save counter - 14 days / Min: 0, Max: 225 | Within range of 0 to 225 | - |
| ID Code Difference(Resp) | No communication condition between vehicle and electrical key transmitter (ID code) / Yes or No | Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle |
- |
| C Code Difference | No communication condition between vehicle and electrical key transmitter (challenge code) / Yes or No | Yes: Key ID code not matched to vehicle No: Key ID code matched to vehicle |
- |
| Auto Entry Cancel SW | Entry door lock function cancel / ON or OFF | Mode status displayed | - |
| Door Unlock Mode2 | Door unlock mode / All or Driver | Mode status displayed | - |
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| ACC SW | Engine switch on (ACC) / ON or OFF | ON: Engine switch on (ACC) OFF: Engine switch off |
- |
| IG SW | Engine switch on (IG) / ON or OFF | ON: Engine switch on (IG) OFF: Engine switch off |
- |
| RR Door Courtesy SW*1 | Rear RH side door courtesy light switch signal / ON or OFF | ON: Rear RH side door open OFF: Rear RH side door closed |
- |
| RL Door Courtesy SW*1 | Rear LH side door courtesy light switch signal / ON or OFF | ON: Rear LH side door open OFF: Rear LH side door closed |
- |
| Back Door Courtesy SW | Back door courtesy light switch signal / ON or OFF | ON: Back door open OFF: Back door closed |
- |
| Back Door Lock Pos SW | Back door lock position switch status / ON or OFF | ON: Back door unlocked OFF: Back door locked |
- |
| Glass Hatch Courtesy Switch*2 | Glass hatch courtesy switch signal / ON or OFF | ON: Glass hatch open OFF: Glass hatch closed |
- |
| Glass Hatch Opener Switch*2 | Glass hatch opener switch signal / ON or OFF | ON: Glass hatch opener switch pushed OFF: Glass hatch opener switch not pushed |
- |
| FR Door Lock Pos | Front RH side door lock position switch signal / UNLOCK or LOCK | UNLOCK: Front RH side door unlocked LOCK: Front RH side door locked |
- |
| FR Door Courtesy | Front RH side door courtesy light switch signal / ON or OFF | OFF: Front RH side door closed ON: Front RH side door open |
- |
| FL Door Lock Pos | Front LH side door lock position switch signal / UNLOCK or LOCK | UNLOCK: Front LH side door unlocked LOCK: Front LH side door locked |
- |
| FL Door Courtesy | Front LH side door courtesy light switch signal / ON or OFF | OFF: Front LH side door closed ON: Front LH side door open |
- |
| RR-Door Lock Pos SW*1 | Rear RH side door lock position switch signal / ON or OFF | ON: Rear RH side door unlocked OFF: Rear RH side door locked |
- |
| RL-Door Lock Pos SW*1 | Rear LH side door lock position switch signal / ON or OFF | ON: Rear LH side door unlocked OFF: Rear LH side door locked |
- |
*1: for 5 Door
*2: w/ Glass Hatch Opener System
PERFORM ACTIVE TEST
Tech Tips
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the intelligent tester to the DLC3.
Turn the engine switch on (IG).
Turn the intelligent tester on.
Enter the following menus: Body / Entry&Start / Active Test.
According to the display on the intelligent tester, perform the Active Test.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Overhead Tuner Power Supply ON | Door control receiver | ON/OFF | - |
| Power for P-Seat Sens | Front door outside handle (for front passenger side) | ON/OFF | - |