DOOR CONTROL TRANSMITTER(w/o Entry and Start System) INSTALLATION

CAUTION / NOTICE / HINT

Note

Take extra care when handling these precision electronic components.

PROCEDURE


  1. INSTALL TRANSMITTER BATTERY (except Separate Type)


    1. B001ELF

      Install the transmitter battery (lithium battery: CR2016) with the positive (+) side up, as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.

      • Do not bend the transmitter battery electrode during installation.

      • Keep the inside of the transmitter battery case free of dust and oil.

    2. B001CU0

      Attach the 7 claws to install the transmitter battery cover.

  2. INSTALL DOOR CONTROL TRANSMITTER MODULE SET (except Separate Type)


    1. B001H7H

      Install the door control transmitter module set to the transmitter housing case from directly above.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • The switches may not be able to operate normally when the door control transmitter module set is installed with keeping its rubber projections bent.

  3. INSTALL TRANSMITTER HOUSING COVER (except Separate Type)


    1. B001CV3

      Install the transmitter housing cover onto the transmitter housing case securely.

  4. INSTALL TRANSMITTER BATTERY (for Separate Type)


    1. B001CC6

      Install the transmitter battery (lithium battery: CR2032) with the positive (+) side up, as shown in the illustration.

      Note


      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the door control transmitter module set from being damaged.

      • Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.

      • Do not bend the transmitter battery electrode during installation.

      • Keep the inside of the transmitter housing case free of dust and oil.

    2. Install the transmitter housing cover.

    3. Press one of the transmitter switches and check that the LED illuminates.