DOOR CONTROL TRANSMITTER(w/ Entry and Start System) INSTALLATION

CAUTION / NOTICE / HINT

Note

Take extra care when handling these precision electronic components.

PROCEDURE


  1. INSTALL TRANSMITTER BATTERY


    1. B001G7H

      Install a new transmitter battery (lithium battery: CR2032) with the positive (+) side facing upward, as shown in the illustration.

      Note


      • Do not bend the transmitter battery electrode during installation.

      • Make sure that the positive (+) side and the negative (-) side of the transmitter battery are correctly matched with the transmitter terminals.

      • Keep the inside of the transmitter housing cover free of dust and oil.

      • When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by touching, for example, the vehicle to prevent the electrical key transmitter sub-assembly from being damaged.

    2. B001E6J

      Install the transmitter housing cover by pressing down on it as shown in the illustration.

    3. B001FG2

      Insert the mechanical key into the transmitter as shown in the illustration.

    4. Press one of the transmitter switches and check that the LED illuminates.

      OK
      Transmitter LED illuminates when a switch is pressed.