BACK DOOR LOCK INSPECTION

PROCEDURE


  1. INSPECT BACK DOOR WITH MOTOR LOCK ASSEMBLY


    1. A01XHCQE01
      Text in Illustration
      *a Unlock
      *b Lock

      Apply battery voltage to the door lock motor and check the operation of the door lock motor.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → 4 (ACT+)

      Battery negative (-) → 1 (ACT-)

      		 Lock

      Battery positive (+) → 1 (ACT-)

      Battery negative (-) → 4 (ACT+)

      		 Unlock

      • If the result is not as specified, replace the back door lock assembly.

    2. Measure the resistance of the door lock position switch.

      Standard Resistance
      Tester Connection Switch Condition Specified Condition
      7 (S) - 8 (E) Lock 10 kΩ or higher
      7 (S) - 8 (E) Unlock Below 1 Ω

      • If the result is not as specified, replace the back door lock assembly.

        Text in Illustration
        *a Unlock
        *b Lock