BACK DOOR LOCK REMOVAL

PROCEDURE


  1. REMOVE CENTER BACK DOOR GARNISH

    Click here

  2. REMOVE BACK DOOR SIDE GARNISH LH

    Click here

  3. REMOVE BACK DOOR SIDE GARNISH RH

    Click here

  4. REMOVE BACK DOOR TRIM COVER

    Click here

  5. REMOVE UPPER TOOL BOX PANEL SUB-ASSEMBLY

    Click here

  6. REMOVE TOOL CASE

    Click here

  7. REMOVE BACK DOOR LOCK COVER (w/o Back Door Tire Carrier, for Standard Type)

    Click here

  8. REMOVE BACK DOOR INSIDE HANDLE BEZEL (w/ Back Door Tire Carrier, for Face to Face Seat Type)

    Click here

  9. REMOVE BACK DOOR TRIM PANEL ASSEMBLY

    Click here

  10. REMOVE DOOR INSIDE HANDLE SUB-ASSEMBLY (w/ Back Door Tire Carrier, for Face to Face Seat Type)

    Click here

  11. REMOVE BACK DOOR SERVICE HOLE COVER

    Click here

  12. REMOVE BACK DOOR LOCK ASSEMBLY


    1. Disconnect the connector.

    2. A01XE91E01
      Text in Illustration
      *A for Standard Type
      *B w/ Back Door Tire Carrier, for Face to Face Seat Type

      Using a T30 "TORX" wrench, remove the 3 screws.

      Note

      Be careful when removing the bolts as the door lock may fall and become damaged.

    3. B001FUK

      Disconnect the cable and remover the back door lock assembly.

    4. Remove the door lock wiring harness seal from the back door lock assembly.