READ DATA LIST
Tech Tips
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
Note
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Data List.
Read the Data List according to the display on the GTS.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| ACC SW | Engine switch on (ACC) signal / ON or OFF | OFF: Engine switch off ON: Engine switch on (ACC) or on (IG) |
"ON" is also displayed for this item when the engine switch is on (IG). |
| IG SW | Engine switch on (IG) signal / ON or OFF | OFF: Engine switch off or on (ACC) ON: Engine switch on (IG) |
"OFF" is also displayed for this item when the engine switch is on (ACC). |
| RR Door Courtesy SW*1 | Rear RH side door courtesy light switch signal / ON or OFF | ON: Rear RH side door open OFF: Rear RH side door closed |
- |
| RL Door Courtesy SW*1 | Rear LH side door courtesy light switch signal / ON or OFF | ON: Rear LH side door open OFF: Rear LH side door closed |
- |
| Back Door Courtesy SW | Back door courtesy light switch signal / ON or OFF | ON: Back door open OFF: Back door closed |
- |
| Back Door Lock Pos SW | Back door lock position switch status / ON or OFF | ON: Back door unlocked OFF: Back door locked |
- |
| Glass Hatch Courtesy Switch*2 | Glass hatch courtesy switch signal / ON or OFF | ON: Glass hatch open OFF: Glass hatch closed |
- |
| FR Door Lock Pos | Front RH side door lock position switch signal / UNLOCK or LOCK | UNLOCK: Front RH side door unlocked LOCK: Front RH side door locked |
- |
| FR Door Courtesy SW | Front RH side door courtesy light switch signal / ON or OFF | ON: Front RH side door closed OFF: Front RH side door open |
- |
| FL Door Lock Pos | Front LH side door lock position switch signal / UNLOCK or LOCK | UNLOCK: Front LH side door unlocked LOCK: Front LH side door locked |
- |
| FL Door Courtesy SW | Front LH side door courtesy light switch signal / ON or OFF | ON: Front LH side door closed OFF: Front LH side door open |
- |
| RR-Door Lock Pos SW*1 | Rear RH side door lock position switch signal / ON or OFF | ON: Rear RH side door unlocked OFF: Rear RH side door locked |
- |
| RL-Door Lock Pos SW*1 | Rear LH side door lock position switch signal / ON or OFF | ON: Rear LH side door unlocked OFF: Rear LH side door locked |
- |
| The Number of DTC | Number of trouble codes / Min.: 0, Max.: 255 | Number of DTCs displayed | - |
*1: for 5 Door
*2: w/ Glass Hatch Opener System
ACTIVE TEST
Tech Tips
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
Connect the GTS to the DLC3.
Turn the engine switch on (IG).
Turn the GTS on.
Enter the following menus: Body Electrical / Main Body / Active Test.
Perform the Active Test according to the display on the GTS.
| Tester Display | Test Part | Control Range | Diagnostic Note |
|---|---|---|---|
| Wireless Buzzer | Wireless door lock buzzer | ON/OFF | - |
| Door Lock | Door lock motor | LOCK/UNLOCK | - |