POWER DOOR LOCK CONTROL SYSTEM PROBLEM SYMPTOMS TABLE

Note

w/ Entry and Start System:

If the main body ECU (multiplex network body ECU) is replaced, refer to the Service Bulletin.

Tech Tips


  • Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.

  • Inspect the fuses and relays related to this system before inspecting the suspected areas below.

Power Door Lock Control System
Symptom Suspected Area See page
Only Driver Door Lock/Unlock Functions do not Operate Front door lock assembly (Driver side)

Click here

Harness or connector -
Driver side junction block assembly

Click here

Only Front Passenger Door Lock/Unlock Functions do not Operate Front door lock assembly (Front passenger side)

Click here

Harness or connector -
Only Rear Door LH Lock/Unlock Functions do not Operate*1 Rear door lock assembly LH

Click here

Harness or connector -
Only Rear Door RH Lock/Unlock Functions do not Operate*1 Rear door lock assembly RH

Click here

Harness or connector -
Only Back Door Lock/Unlock Functions do not Operate Back door lock assembly

Click here

Harness or connector -
All Doors Lock/Unlock Functions do not Operate*2 Proceed to "Power Source Circuit"

Click here

All Doors Lock/Unlock Functions do not Operate*3 Harness or connector -
Main body ECU (Multiplex network body ECU)

Click here

Driver side junction block assembly

Click here

All doors LOCK/UNLOCK functions do not operate via master switch or door key cylinder Proceed to "All Doors LOCK/UNLOCK Functions do not Operate Via Master Switch, Driver Side Door Key Cylinder"

Click here

Double Locking Function does not Operate Properly*4 LIN communication system

Click here

Front door lock assembly LH

Click here

Front door lock assembly RH

Click here

Rear door lock assembly LH*1

Click here

Rear door lock assembly RH*1

Click here

Harness or connector -
Double lock door control relay assembly

Click here

Main body ECU (Multiplex network body ECU)

Click here

Speed-sensitive automatic door lock function does not operate (meter /gauge system operates normally)*5 CAN communication system (w/ Central Gateway ECU)

Click here

CAN communication system (w/o Central Gateway ECU)

Click here

Main body ECU (Multiplex network body ECU)

Click here

Driver side junction block assembly

Click here

Shift-linked automatic door lock/unlock functions do not operate (automatic transmission system operates normally).*6 CAN communication system (w/ Central Gateway ECU)

Click here

CAN communication system (w/o Central Gateway ECU)

Click here

Main body ECU (Multiplex network body ECU)

Click here

ECM (for 1GR-FE)

Click here

ECM (for 1KD-FTV)

Click here

ECM (for 1GD-FTV)

Click here

ECM (for 5L-E)

Click here

ECM (for 2GTR-FE)

Click here

Key lock-in prevention function does not operate. Front door courtesy light switch assembly LH (for LHD)

Click here

Front door courtesy light switch assembly RH (for RHD)

Click here

Harness or connector -
Driver side junction block assembly

Click here

Main body ECU (Multiplex network body ECU)

Click here

Lock operation continues even after doors have been locked*7 Front door lock assembly LH

Click here

Front door lock assembly RH

Click here

Rear door lock assembly LH*1

Click here

Rear door lock assembly RH*1

Click here

Back door lock assembly

Click here

Harness or connector -
Driver side junction block assembly

Click here

Main body ECU (Multiplex network body ECU)

Click here

Collision door lock release function does not operate*2, *5 Proceed to "Collision Door Lock Release Function does not Operate"

Click here

Collision door lock release function does not operate*3, *5 Harness or connector -
Driver side junction block assembly

Click here

Main body ECU (Multiplex network body ECU)

Click here

When returning to the vehicle, although door unlock operation was not performed, doors were in an unlocked state. Main body ECU (Multiplex network body ECU)

Click here

When returning to the vehicle, although door lock operation was not performed, doors were in a locked state. Main body ECU (Multiplex network body ECU)

Click here


Tech Tips

*7: When the door unlock detection switch detects an unlock position signal after a door lock operation has been performed, a door lock operation will be performed 3 times.