POWER DOOR LOCK CONTROL SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE POWER DOOR LOCK CONTROL SYSTEM

   
   

   1. Customizing with the GTS

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Customize Setting / Door Lock.

      5. Select the setting by referring to the table below.

         Door Lock

         Display	Default	Content	Setting	Relevant ECU
         Unlock Key Twice	OFF	Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors	ON or OFF	Main body ECU (multiplex network body ECU)
         Auto Lock*1	ON	Function that locks all doors when the vehicle speed reaches a certain level	ON or OFF	Main body ECU (multiplex network body ECU)
         Auto Lock/Shift*2	OFF	Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed	ON or OFF	Main body ECU (multiplex network body ECU)
         Auto Unlock/Shift*3	OFF	Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON	ON or OFF	Main body ECU (multiplex network body ECU)
         All Unlock/Open-Close*4	ON*5 OFF*5	Function that unlocks the other doors when the driver door is opened within 45 seconds after the ignition switch is turned off	ON or OFF	Main body ECU (multiplex network body ECU)

         
         

         • *1: w/ Speed-sensitive Automatic Door Lock Function

         • *2: w/ Shift-linked Automatic Door Lock Function

         • *3: w/ Shift-linked Automatic Door Unlock Function

         • *4: w/ Driver Door-linked Automatic Door Unlock Function

         • *5: Default setting differs depending on the vehicle.

2. CUSTOMIZING FUNCTION WITH MULTI-DISPLAY

   
   

   1. Customizing with Multi-display

      
      

      1. Turn the ignition switch to ON.

      2. Enter the following menus: Setup / Vehicle / Vehicle Customization / Door Lock Settings.

      3. Select the setting by referring to the table below.

         Door Lock

         Display	Default	Content	Setting	Relevant ECU
         Unlock on second key turn	OFF	Function that unlocks only the driver door when the driver door key cylinder is turned to unlock once, and unlocks all doors when it is turned to unlock twice. For the OFF setting, turning it once unlocks all doors	ON or OFF	Main body ECU (multiplex network body ECU)
         Speed sensitive auto locking*1	ON	Function that locks all doors when the vehicle speed reaches a certain level	ON or OFF	Main body ECU (multiplex network body ECU)
         Auto lock by shift from P*2	OFF	Function that locks all doors when the shift lever is moved from P to any position other than P while the engine is running and all doors are closed	ON or OFF	Main body ECU (multiplex network body ECU)
         Auto unlock by shift to P*3	OFF	Function that unlocks all doors when the shift lever is moved to P from any position other than P while the ignition switch is ON	ON or OFF	Main body ECU (multiplex network body ECU)
         Auto unlock by driver door*4	ON*5 OFF*5	Function that unlocks the other doors when the driver door is opened within 43 seconds after the ignition switch is turned off	ON or OFF	Main body ECU (multiplex network body ECU)

         
         

         • *1: w/ Speed-sensitive Automatic Door Lock Function

         • *2: w/ Shift-linked Automatic Door Lock Function

         • *3: w/ Shift-linked Automatic Door Unlock Function

         • *4: w/ Driver Door-linked Automatic Door Unlock Function

         • *5: Default setting differs depending on the vehicle.