POWER DOOR LOCK CONTROL SYSTEM OPERATION CHECK


  1. CHECK POWER DOOR LOCK OPERATION

    Note

    The operation check below is based on the non-customized initial condition of the vehicle.


    1. Check basic functions.


      1. Check that all doors lock when the lock side of the door control switch (for manual operation) is pressed, and all doors unlock when the unlock side is pressed.

      2. Check that all doors lock when the driver door lock key cylinder is turned to lock using the key.

      3. Check that all doors unlock when the driver door lock key cylinder is turned to unlock using the key.

    2. Check the key lock-in prevention function.

      Note

      In order to prevent the key from being locked in, the following inspection should be performed with the driver door window open.


      1. Turn the ignition switch to ON or ACC.

      2. With the driver door open, check that all doors unlock immediately after the door lock knob for the driver door is locked.

      3. With the driver door open, check that all doors unlock immediately after the lock side of the door control switch (for manual operation) is pressed.

      4. With the driver door open, lock the driver door lock knob and hold it for 2 seconds or more. Then close the driver door and check that all doors unlock.

    3. Check the security function.


      1. Close all doors with the driver side door glass open so that the door control switch can be operated from outside the vehicle.

      2. Remove the key from the inside of the vehicle, open the driver side door and close and lock the door without using the key. Then, check that all doors do not unlock when the door control switch (for manual operation) is turned to unlock from outside the vehicle.

      3. Remove the key from the inside of the vehicle, and then close and lock the driver side door with the key. Under this condition, check that all doors do not unlock when the door control switch (for manual operation) is turned to unlock from outside the vehicle.

      4. Remove the key from the inside of the vehicle, close the driver side door and lock the door with the wireless door lock operation. Then, check that all doors do not unlock when the door control switch (for manual operation) is turned to unlock from outside the vehicle.

        Tech Tips

        Check that the security function is canceled under the following conditions:


        • The ignition switch is turned to ON.

        • The driver side door is unlocked using the key.

        • The door control switch (for manual operation) is turned to unlock after the door lock knob is unlocked manually.

        • The doors are unlocked by a wireless operation.

    4. Check the key-linked 2-step unlock function.

      Tech Tips

      The key-linked 2-step unlock function can be customized. Make sure that this function is "ON" before performing.


      1. Lock all doors.

      2. Check that only the driver door unlocks when the driver door lock cylinder is turned to unlock once using the key and the other doors unlock when the cylinder is turned to unlock consecutively once again.

    5. Check the driver door-linked automatic door unlock function. (w/ Driver Door-linked Automatic Door Unlock Function)

      Tech Tips

      The driver door-linked automatic door unlock function can be customized. Make sure that this function is "ON" before performing.


      1. When the driver door is closed, turning the ignition switch from ON to off and opening the driver door within 45 seconds will automatically unlock all doors.

    6. Check the shift-linked automatic door lock function. (w/ Shift-linked Automatic Door Lock Function)

      Tech Tips

      The shift linked automatic door lock function can be customized. Make sure that this function is "ON" before performing.


      1. When the ignition switch is ON and the shift lever is moved from P to any position other than P, check that all doors lock automatically.

    7. Check the shift-linked automatic door unlock function. (w/ Shift-linked Automatic Door Unlock Function)

      Tech Tips

      The shift linked automatic door unlock function can be customized. Make sure that this function is "ON" before performing.


      1. When the ignition switch is ON and the shift lever is moved to P from any position other than P, check that all doors unlock automatically.

    8. Check the speed-sensitive automatic door lock function. (w/ Speed-sensitive Automatic Door Lock Function)

      Tech Tips

      The speed-sensitive automatic door lock function can be customized. Make sure that this function is "ON" before performing.


      1. When any door is unlocked and the vehicle is driven at approximately 20 km/h (12 mph) or more, check that all doors automatically lock at once (automatic door lock).

    9. Check the illuminated entry function.


  2. CHECK DOUBLE LOCK FUNCTION (w/ Double Locking System)

    Note


    • Never activate the double locking function when there are people in the vehicle because the doors cannot be opened from the inside. If the doors are locked by accident, unlock the door by using the wireless unlock operation or entry unlock operation*.

    • The double locking function is not applicable to the back door.


    • *: w/ Entry and Start System


    1. Check that the double locking function can be operated by using the wireless door lock operation.


      1. Open all the windows.

      2. Turn the ignition switch off.

      3. Open and close the driver door and make sure that all the doors including the back door are closed securely.

      4. Press the transmitter lock switch twice within 5 seconds and check that the hazard warning lights flash once as an answer back.

      5. Try to unlock all the doors with the inside handle and check that none of the doors unlock.

    2. Check that the double locking function can be operated by using the entry lock operation. (w/ Entry and Start System)


      1. Open all the windows.

      2. Turn the ignition switch off.

      3. Open and close the driver door and make sure that all the doors including the back door are closed securely.

      4. Touch the lock sensor on the outside door handle within 5 seconds while holding the key and check that the hazard warning lights flash once as an answer back.

      5. Try to unlock all the doors with the inside handle and check that none of the doors unlock.

    3. Check that the double locking function is canceled.


      1. Unlock the doors by using the wireless unlock operation or entry unlock operation* while the double lock is set and check that the hazard warning lights flash twice as an answer back.


        • *: w/ Entry and Start System

      2. Check that the doors can be opened both by the inside handle and outside handle.

        Tech Tips

        If the transmitter battery is depleted, the driver door can be unlocked using the key, but the other doors cannot be unlocked. However, the theft deterrent system still remains on. The theft alarm will sound when the door is opened without using the transmitter.