Tech Tips
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
Inspect the fuses and relays related to this system before inspecting the suspected areas below.
| Symptom | Suspected Area | See page |
|---|---|---|
| Entire combination meter assembly does not operate | Refer to "Entire Combination Meter does not Operate" | |
| Meter illumination is always dark | Refer to "Meter Illumination is Always Dark" | |
| Meter illumination does not dim at night | Refer to "Meter Illumination does not Dim at Night" | |
| Operating light control rheostat does not change light brightness | Refer to "Operating Light Control Rheostat does not Change Light Brightness" |
| Symptom | Suspected Area | See page |
|---|---|---|
| Speedometer malfunction | Refer to "Speedometer Malfunction" | |
| Tachometer malfunction | Refer to "Tachometer Malfunction" | |
| Fuel receiver gauge malfunction | Refer to "Fuel Receiver Gauge Display Malfunction" | |
| Engine coolant temperature malfunction | Refer to "Engine Coolant Temperature Receiver Gauge Malfunction" | |
| ODO/TRIP meter malfunction | Refer to "Odo/Trip Switch Malfunction" |
| Symptom | Suspected Area | See page |
|---|---|---|
| FRONT FOG indicator light does not come on*1 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Lighting system | ||
| Combination meter assembly | ||
| REAR FOG indicator light does not come on*2 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Lighting system | ||
| Combination meter assembly | ||
| BEAM indicator light does not come on | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Lighting system | ||
| Combination meter assembly | ||
| Turn signal indicator light malfunction | Lighting system | |
| Harness or connector | - | |
| Turn signal flasher assembly | ||
| Combination meter assembly | ||
| FUEL warning light does not come on (Fuel receiver gauge operates normally) | Check indicator/warning light | |
| Combination meter assembly | ||
| Brake warning light does not come on | Check indicator/warning light | |
| Harness or connector | - | |
| Master cylinder reservoir sub-assembly (brake fluid level warning switch) | ||
| Proceed to "Brake Warning Light Come ON" (for Hydraulic Brake Booster) | ||
| Proceed to "Brake Warning Light Come ON" (for Vacuum Brake Booster, 2TR-FE) | ||
| Proceed to "Brake Warning Light Come ON" (for Vacuum Brake Booster, 5L-E) | ||
| Combination meter assembly | ||
| Brake warning light does not go off | Check indicator/warning light | |
| Harness or connector | - | |
| Master cylinder reservoir sub-assembly (brake fluid level warning switch) | ||
| Proceed to "Brake Warning Light Remains ON" (for Hydraulic Brake Booster) | ||
| Proceed to "Brake Warning Light Remains ON" (for Vacuum Brake Booster, 2TR-FE) | ||
| Proceed to "Brake Warning Light Remains ON" (for Vacuum Brake Booster, 5L-E) | ||
| Combination meter assembly | ||
| SRS warning light does not come on | Check indicator/warning light | |
| Proceed to "SRS Warning Light does not Come ON" | ||
| Combination meter assembly | ||
| SRS warning light does not go off | Check indicator/warning light | |
| Proceed to "SRS Warning Light does not Remains ON" | ||
| Combination meter assembly | ||
| DOOR warning light does not come on | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Proceed to "Door Courtesy Switch Circuit" | ||
| Proceed to "Back Door Courtesy Switch Circuit" | ||
| Main body ECU | ||
| Combination meter assembly | ||
| CHARGE warning light does not come on*3 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Charging system (for 1GD-FTV) | ||
| Charging system (for 2TR-FE) | ||
| Combination meter assembly | ||
| CHARGE warning light does not come on*4 | Check indicator/warning light | |
| Harness or connector | - | |
| Generator assembly (for 1GR-FE) | ||
| Generator assembly (for 1KD-FTV) | ||
| Generator assembly (for 5L-E) | ||
| Combination meter assembly | ||
| MIL (Malfunction Indicator Lamp) malfunction | Proceed to "MIL Circuit" (for 1GR-FE) | |
| MIL Circuit (for 2TR-FE) | ||
| Proceed to "MIL CircuitW (for 1KD-FTV) | ||
| Proceed to "MIL Circuit" (for 1GD-FTV) | ||
| Proceed to "MIL Circuit" (for 1GD-FTV, w/ Urea SCR System) | ||
| Proceed to "MIL Circuit" (for 5L-E) | ||
| Combination meter assembly | ||
| Front seat belt warning light does not come on | Check indicator/warning light | |
| Proceed to "Driver Side Seat Belt Warning Light does not Operate" | ||
| Proceed to "Front Passenger Side Seat Belt Warning Light Malfunction" | ||
| ABS warning light does not come on | Check indicator/warning light | |
| Proceed to "ABS Warning Light Come ON" (for Hydraulic Brake Booster) | ||
| Proceed to "ABS Warning Light Come ON" (for Vacuum Brake Booster, 2TR-FE) | ||
| Proceed to "ABS Warning Light Come ON" (for Vacuum Brake Booster, 5L-E) | ||
| Combination meter assembly | ||
| ABS warning light does not go off | Check indicator/warning light | |
| Proceed to "ABS Warning Light Remains ON" (for Hydraulic Brake Booster) | ||
| Proceed to "ABS Warning Light Remains ON" (for Vacuum Brake Booster, 2TR-FE) | ||
| Proceed to "ABS Warning Light Remains ON" (for Vacuum Brake Booster, 5L-E) | ||
| Combination meter assembly | ||
| PPS warning light malfunction*5 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Power steering system | ||
| Combination meter assembly | ||
| SLIP indicator light does not come on*6 | Check indicator/warning light | |
| Proceed to "Slip Indicator Light Come ON" (for Hydraulic Brake Booster) | ||
| Proceed to "Slip Indicator Light Come ON" (for Vacuum Brake Booster, 2TR-FE) | ||
| Combination meter assembly | ||
| SLIP indicator light does not go off*6 | Check indicator/warning light | |
| Proceed to "Slip Indicator Light Remains ON" (for Hydraulic Brake Booster) | ||
| Proceed to "Slip Indicator Light Remains ON" (for Vacuum Brake Booster) | ||
| Combination meter assembly | ||
| Cruise indicator light does not come on*7 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Proceed to "Cruise Main Indicator Light Circuit" | ||
| Combination meter assembly | ||
| Cruise set indicator light does not come on*7 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Proceed to "Cruise SET Indicator Light Circuit" | ||
| Proceed to "Cruise SET Indicator Light Circuit" (w/ Dynamic Radar Cruise Control System) | ||
| Combination meter assembly | ||
| Radar cruise indicator light does not come on*8 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Proceed to "Cruise Main Indicator Light Circuit" | ||
| Combination meter assembly | ||
| Master warning light does not come on | Check indicator/warning light | |
| Combination meter assembly | ||
| A/T shift indicator light does not come on*9 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Automatic transmission system (for A750F, 1KD-FTV) | ||
| Automatic transmission system (for AC60F, 1GR-FE) | ||
| Automatic transmission system (for AC60F, 2TR-FE) | ||
| Automatic transmission system (for AC60F, 1GD-FTV) | ||
| Combination meter assembly | ||
| SIL indicator light (UP, DOWN) does not come on*10, *11 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| ECD system (for 1KD-FTV) | ||
| ECD system (for 1GD-FTV, w/ Urea SCR System) | ||
| ECD system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| Center differential lock indicator light malfunction | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Differential system | ||
| Combination meter assembly | ||
| Rear differential lock indicator light malfunction*12 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Differential system | ||
| Combination meter assembly | ||
| 4LO indicator light malfunction | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Differential system | ||
| Combination meter assembly | ||
| 2nd START indicator light malfunction*9 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and start system) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Automatic transmission system (for A750F, 1KD-FTV) | ||
| Automatic transmission system (for AC60F, 1GR-FE) | ||
| Automatic transmission system (for AC60F, 2TR-FE) | ||
| Automatic transmission system (for AC60F, 1GD-FTV) | ||
| Combination meter assembly | ||
| A/T OIL TEMP indicator light malfunction*9, *22 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Automatic transmission system (for A750F, 1KD-FTV) | ||
| Automatic transmission system (for AC60F, 1GR-FE) | ||
| Automatic transmission system (for AC60F, 2TR-FE) | ||
| Automatic transmission system (for AC60F, 1GD-FTV) | ||
| Combination meter assembly | ||
| TAIL indicator light does not come on | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Main body ECU | ||
| Combination meter assembly | ||
| VSC OFF indicator light does not come on*6 | Check indicator/warning light | |
| Proceed to "VSC OFF Indicator Light Come ON" (for Hydraulic Brake Booster) | ||
| Proceed to "VSC OFF Indicator Light Come ON" (for Vacuum Brake Booster) | ||
| Combination meter assembly | ||
| VSC OFF indicator light does not go off*6 | Check indicator/warning light | |
| Proceed to "VSC OFF Indicator Light Remains ON" (for Hydraulic Brake Booster) | ||
| Proceed to "VSC OFF Indicator Light Remains ON" (for Vacuum Brake Booster) | ||
| Combination meter assembly | ||
| TRC OFF indicator light does not come on*6 | Check indicator/warning light | |
| Proceed to "TRC OFF Indicator Light Come ON" (for Hydraulic Brake Booster) | ||
| Proceed to "TRC OFF Indicator Light Come ON" (for Vacuum Brake Booster) | ||
| Combination meter assembly | ||
| TRC OFF indicator light does not go off*6 | Check indicator/warning light | |
| Proceed to "TRC OFF Indicator Light Remains ON" (for Hydraulic Brake Booster) | ||
| Proceed to "TRC OFF Indicator Light Remains ON" (for Vacuum Brake Booster, 2TR-FE) | ||
| Combination meter assembly | ||
| Eco driving indicator light malfunction*9 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| SFI system (for 1GR-FE) | ||
| SFI system (for 2TR-FE) | ||
| ECD system (for 1KD-FTV) | ||
| ECD system (for 1GD-FTV, w/ Urea SCR System) | ||
| ECD system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| SPEED LIMITER indicator light malfunction*13 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| SFI system (for 1GR-FE) | ||
| SFI system (for 2TR-FE) | ||
| ECD system (for 1KD-FTV) | ||
| ECD system (for 5L-E) | ||
| Combination meter assembly | ||
| T-BELT warning indicator light malfunction*14, *22 | Check indicator/warning light | |
| Combination meter assembly | ||
| GLOW indicator light malfunction *15 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| ECD system (for 1KD-FTV) | ||
| ECD system (for 1GD-FTV, w/ Urea SCR System) | ||
| ECD system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| GLOW indicator light malfunction*16 | Harness or connector | - |
| Combination meter assembly | ||
| ECM | ||
| CRAWL indicator light does not come on*17 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for RHD with Entry and Start System) | ||
| Check indicator/warning light | ||
| Vehicle stability control system (for Hydraulic Brake Booster) | ||
| Combination meter assembly | ||
| CRAWL indicator light does not go off*17 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for RHD with Entry and Start System) | ||
| Check indicator/warning light | ||
| Vehicle stability control system (for Hydraulic Brake Booster) | ||
| Combination meter assembly | ||
| Downhill assist control indicator light does not come on*18 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for RHD with Entry and Start System) | ||
| Check indicator/warning light | ||
| Vehicle stability control system (for Hydraulic Brake Booster) | ||
| Combination meter assembly | ||
| Downhill assist control indicator light does not go off*18 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for RHD with Entry and Start System) | ||
| Check indicator/warning light | ||
| Vehicle stability control system (for Hydraulic Brake Booster) | ||
| Combination meter assembly | ||
| Multi-terrain select indicator light does not come on*17 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for RHD with Entry and Start System) | ||
| Check indicator/warning light | ||
| Vehicle stability control system (for Hydraulic Brake Booster) | ||
| Combination meter assembly | ||
| Multi-terrain select indicator light does not go off*17 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for RHD with Entry and Start System) | ||
| Check indicator/warning light | ||
| Vehicle stability control system (for Hydraulic Brake Booster) | ||
| Combination meter assembly | ||
| Clearance sonar indicator light malfunction*19, *20 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| TOYOTA Parking Assist-sensor System (w/ Multi-display) | ||
| TOYOTA Parking Assist-sensor System (w/o Multi-display) | ||
| Combination meter assembly | ||
| PCS warning light malfunction*21 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for RHD with Entry and Start System) | ||
| Check indicator/warning light | ||
| Pre-crash safety system | ||
| Combination meter assembly | ||
| Oil pressure warning light does not come on*22 | Check indicator/warning light | |
| Engine oil pressure switch assembly (for 1GR-FE) | ||
| Engine oil pressure switch assembly (for 2TR-FE) | ||
| Engine oil pressure switch assembly (for 1KD-FTV) | ||
| Engine oil pressure switch assembly (for 5L-E) | ||
| Engine oil pressure switch assembly (for 1GD-FTV) | ||
| Harness or connector | - | |
| Combination meter assembly | ||
| Oil level warning light does not come on*22, *23, *24 | Check indicator/warning light | |
| Engine oil level sensor (1GR-FE) | ||
| Engine oil level sensor (for 1KD-FTV) | ||
| Engine oil level sensor (for 1GD-FTV) | ||
| Harness or connector | - | |
| Combination meter assembly | ||
| Oil maintenance warning light does not come on*11, *25 | Check indicator/warning light | |
| Combination meter assembly | ||
| Kinetic dynamic suspension indicator light malfunction*26 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for RHD with Entry and Start System) | ||
| Check indicator/warning light | ||
| Kinetic dynamic suspension control System | ||
| Combination meter assembly | ||
| SEDIMENT/FILTER warning light does not come on*27 | Check indicator/warning light | |
| Sediment warning switch (for 1KD-FTV) | ||
| Combination meter assembly | ||
| SEDIMENT warning light does not come on*28 | Check indicator/warning light | |
| Sediment switch (for 5L-E) | ||
| Combination meter assembly | ||
| Key indicator light does not come on*22, *29 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for RHD with Entry and Start System) | ||
| Check indicator/warning light | ||
| Entry and start system | ||
| Combination meter assembly | ||
| BSM indicator light does not come on*30 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for RHD with Entry and Start System) | ||
| Check indicator/warning light | ||
| Blind spot monitor system | ||
| Combination meter assembly | ||
| Headlight beam level control system warning light does not come on*31 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Lighting system | ||
| Combination meter assembly | ||
| LED headlight warning light does not come on*31 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Check indicator/warning light | ||
| Lighting system | ||
| Combination meter assembly | ||
| Tire pressure warning light does not come on*32 | Check indicator/warning light | |
| Proceed to "Tire Pressure Warning Light Circuit" | ||
| Combination meter assembly | ||
| Washer level warning light does not come on*22, *33 | Level warning switch assembly | |
| Harness or connector | - | |
| Combination meter assembly | ||
| Diesel particulate filter warning light does not come on*34 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| ECD system (for 1GD-FTV, w/ Urea SCR System) | ||
| ECD system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| Reductant warning indicator does not come on*35 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| ECD system (for 1GD-FTV, w/ Urea SCR System) | ||
| Combination meter assembly |
*1: w/ Front Fog Light
*2: w/ Rear Fog Light
*3: for 1GD-FTV, 2TR-FE
*4: for 1KD-FTV, 1GR-FE, 5L-E
*5: w/ Power Steering System
*6: w/ VSC
*7: w/ Cruise Control System
*8: w/ Dynamic Radar Cruise Control System
*9: for Automatic Transmission
*10: for Manual Transmission
*11: for Europe
*12 w/ Rear Differential Lock
*13: for Middle East
*14: for 1KD-FTV, 5L-E
*15: for 1KD-FTV, 1GD-FTV
*16: for 5L-E
*17: w/ CRAWL Control
*18: w/ Downhill Assist Control
*19: w/ TOYOTA Parking Assist-sensor System
*20: for Optitron Meter
*21: w/ Pre-crash Safety System
*22: for Analog Meter, Segment Display Type
*23: for 1KD-FTV, 1GD-FTV
*24: for 1GR-FE, Europe
*25: for 1GD-FTV
*26: w/ Kinetic Dynamic Suspension System
*27: w/ SEDIMENT/FILTER Warning Light
*28: w/ SEDIMENT Warning Light
*29: w/ Entry and Start System
*30: w/ Blind Spot Monitor System
*31: for LED Headlight
*32: w/ Tire Pressure Monitor System
*33: w/ Washer Fluid Level Warning System
*34: w/ DPF
*35: w/ Urea SCR System
| Symptom | Suspected Area | See page |
|---|---|---|
| Average vehicle speed display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Driving range display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Average fuel consumption display display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Average fuel consumption after refueling display malfunction (Combination meter assembly operates normally)* | Combination meter assembly | |
| Current fuel consumption display malfunction (Combination meter assembly operates normally) | Combination meter assembly | |
| Operating multi-information switch does not change multi-information display* | Multi-information switch (steering pad switch assembly) | |
| Harness or connector | - | |
| LIN communication system | ||
| Driving support switch control ECU | ||
| Combination meter assembly | ||
| Eco driving indicator zone display malfunction (for Automatic Transmission) | Combination meter assembly (Eco driving indicator zone display setting) | |
| SFI system (for 1GR-FE) | ||
| SFI system (for 2TR-FE) | ||
| ECD system (for 1KD-FTV) | ||
| Combination meter assembly | ||
| Outside temperature display malfunction | Air conditioning system (for Automatic Air Conditioning System) | |
| Air conditioning system (for Manual Air Conditioning System) | ||
| Combination meter assembly | ||
| Road surface ice display malfunction (outside temperature display operates normally) (for Optitron Meter) | Combination meter assembly | |
| Digital speedometer display malfunction (speedometer operates normally)* | Combination meter assembly |
*: for Optitron Meter
| Symptom | Suspected Area | See page |
|---|---|---|
| Multi-information display does not light up (combination meter operates normally) | Check indicator/warning light | |
| Combination meter assembly | ||
| Multi-information display malfunction (all warning displays come on, cruise information display does not come on and outside temperature display indicates "F") | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Combination meter assembly | ||
| Air suspension indicator display malfunction*1 | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Air suspension system | ||
| Combination meter assembly | ||
| Steering angle display malfunction | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Vehicle stability control system (for Hydraulic Brake Booster) | ||
| Spiral cable sub-assembly | ||
| Combination meter assembly | ||
| Door open message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Proceed to "Door Courtesy Switch Circuit" | |
| Proceed to "Back Door Courtesy Switch Circuit" | ||
| Main body ECU | ||
| Combination meter assembly | ||
| "MOON ROOF OPENED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*2 | Sliding roof control system | |
| Combination meter assembly | ||
| "ENGINE OIL PRESSURE LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Engine oil pressure switch assembly (for 1GR-FE) | |
| Engine oil pressure switch assembly (for 2TR-FE) | ||
| Engine oil pressure switch assembly (for 1KD-FTV) | ||
| Engine oil pressure switch assembly (for 1GD-FTV) | ||
| Combination meter assembly | ||
| "RELEASE PARKING BRAKE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Brake warning light operate normally) | Combination meter assembly | |
| "HIGH TRANSMISSION FLUID TEMPERATURE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3 | Automatic transmission system (for A750F, 1KD-FTV) | |
| Automatic transmission system (for AC60F, 1GR-FE) | ||
| Automatic transmission system (for AC60F, 2TR-FE) | ||
| Automatic transmission system (for AC60F, 1GD-FTV) | ||
| Combination meter assembly | ||
| "CHECK TRANSMISSION SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3 | Automatic transmission system (for A750F, 1KD-FTV) | |
| Automatic transmission system (for AC60F, 1GR-FE) | ||
| Automatic transmission system (for AC60F, 2TR-FE) | ||
| Automatic transmission system (for AC60F, 1GD-FTV) | ||
| Combination meter assembly | ||
| "SHIFT TO P POSITION" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3, *4 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "KEY NOT DETECTED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "KEY BATTERY LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "CHECK CLUTCH SWITCH" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*5 | Clutch pedal switch | |
| Combination meter assembly | ||
| "CHECK STEERING LOCK SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Steering lock system | |
| Combination meter assembly | ||
| "STEERING LOCK ACTIVE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Steering lock system | |
| Combination meter assembly | ||
| "KEY DETECTED IN VEHICLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "AUTO POWER OFF TO CONSERVE BATTERY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "DEPRESS BRAKE PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3, *4 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "DEPRESS CLUTCH PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4, *5 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "DEPRESS BRAKE PEDAL AND PUSH ENGINE SWITCH TO START" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3, *4 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "DEPRESS CLUTCH PEDAL AND PUSH ENGINE SWITCH TO START" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4, *5 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "SHIFT TO P POSITION TO START" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*3 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "TURN POWER OFF" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "SHIFT TO P POSITION AND PUSH ENGINE SWITCH TO TURN POWER OFF" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*4 | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| Dynamic radar cruise control system message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | |
| Combination meter assembly | ||
| "ADJUSTING FRONT RADAR BEAM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | |
| Combination meter assembly | ||
| "CHECKING CRUISE CONTROL C/D" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | |
| Combination meter assembly | ||
| "CHECKING CRUISE CONTROL BRAKE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | |
| Combination meter assembly | ||
| "CLEAN RADAR SENSOR" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | |
| Combination meter assembly | ||
| "CRUISE CONTROL NOT AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*6 | Dynamic radar cruise control system | |
| Combination meter assembly | ||
| "CHECK CRUISE CONTROL SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*7 | Cruise control system | |
| Dynamic radar cruise control system (w/ Dynamic Radar Cruise Control System) | ||
| Combination meter assembly | ||
| Pre-crash safety system message is displayed when it should not be, not displayed when it should be, or not displayed correctly*8 | Pre-crash safety system | |
| Combination meter assembly | ||
| "BRAKE !" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*8 | Pre-crash safety system | |
| Combination meter assembly | ||
| "CHECK PCS SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*8 | Pre-crash safety system | |
| Combination meter assembly | ||
| "PCS TEMPORARILY NOT AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*8 | Pre-crash safety system | |
| Combination meter assembly | ||
| "CHECK AIR SUSPENSION SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*1 | Suspension control system | |
| Combination meter assembly | ||
| "AIR SUSPENSION TEST MODE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*1 | Air suspension system | |
| Combination meter assembly | ||
| TOYOTA parking assist-sensor system message is displayed when it should not be, not displayed when it should be, or not displayed correctly*9 | TOYOTA Parking Assist-sensor System (w/ Multi-display) | |
| TOYOTA Parking Assist-sensor System (w/o Multi-display) | ||
| Combination meter assembly | ||
| "CHECK SONAR SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*9 | TOYOTA Parking Assist-sensor System (w/ Multi-display) | |
| TOYOTA Parking Assist-sensor System (w/o Multi-display) | ||
| Combination meter assembly | ||
| "CLEAN SONAR" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*9 | TOYOTA Parking Assist-sensor System (w/ Multi-display) | |
| TOYOTA Parking Assist-sensor System (w/o Multi-display) | ||
| Combination meter assembly | ||
| "BSM NOT AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*10 | Blind spot monitor system | |
| Combination meter assembly | ||
| "CHECK BSM SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*10 | Blind spot monitor system | |
| Combination meter assembly | ||
| "ENGINE OIL LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12, *13 | Engine oil level sensor (for 1GR-FE) | |
| Engine oil level sensor (for 1KD-FTV) | ||
| Engine oil level sensor (for 1GD-FTV) | ||
| Combination meter assembly | ||
| "FUEL FILTER MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12 | Fuel filter assembly (sedimenter switch) (for 1KD-FTV) | |
| Fuel filter assembly (sedimenter switch) (for 1GD-FTV) | ||
| Combination meter assembly | ||
| "DRAIN WATER FROM FUEL FILTER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12 | Level warning switch (for 1KD-FTV) | |
| Level warning switch (for 1GD-FTV) | ||
| Combination meter assembly | ||
| "CRAWL HAS BEEN DEACTIVATED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Combination meter assembly | ||
| "CRAWL NOT AVAILABLE SELECT L4 AND SHIFT TO D OR R POSITION" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Combination meter assembly | ||
| "CRAWL NOT AVAILABLE CHECK SYSTEM OPERATION CONDITIONS" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Combination meter assembly | ||
| "CHECK FUEL SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11, *12 | Fuel system (for 1KD-FTV) | |
| Fuel system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| "T-BELT MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11 | Combination meter assembly | |
| T-BELT maintenance reset message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11 | Combination meter assembly | |
| T-BELT maintenance reset complete message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11 | Combination meter assembly | |
| T-BELT maintenance mileage message is displayed when it should not be, not displayed when it should be, or not displayed correctly*11 | Combination meter assembly | |
| "OIL MAINTENANCE REQUIRED SOON" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*12, *15 | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| ECD system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| "OIL MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*12, *15 | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| ECD system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| Oil maintenance required reset message is displayed when it should not be, not displayed when it should be, or not displayed correctly*12, *15 | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| ECD system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| Oil maintenance reset complete message is displayed when it should not be, not displayed when it should be, or not displayed correctly*12, *15 | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| ECD system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| Oil maintenance reset unfinished message is displayed when it should not be, not displayed when it should be, or not displayed correctly*12, *15 | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| ECD system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| Multi-terrain select message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Combination meter assembly | ||
| "SHIFT TO L4" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Combination meter assembly | ||
| "STOP THE VEHICLE AND SHIFT THE AUTOMATIC TRANSMISSION TO N" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Combination meter assembly | ||
| "MULTI-TERRAIN SELECT NOT AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Combination meter assembly | ||
| "OPERATION NOT POSSIBLE WHEN MULTI-TERRAIN SELECT ACTIVATED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Combination meter assembly | ||
| "OPERATION NOT POSSIBLE WHEN CRAWL CONTROL ACTIVATED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Combination meter assembly | ||
| "MULTI-TERRAIN SELECT HAS BEEN CANCELED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*14 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Combination meter assembly | ||
| "CHECK HEADLIGHT SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*16 | Lighting system | |
| Combination meter assembly | ||
| "LOW WASHER FLUID" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*17 | Level warning switch assembly | |
| Combination meter assembly | ||
| Clinometer display malfunction | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Yaw rate sensor | ||
| Combination meter assembly | ||
| Traction operation display malfunction | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Vehicle stability control system (for Hydraulic Brake Booster) | ||
| Vehicle stability control system (for Vacuum Brake Booster) | ||
| Combination meter assembly | ||
| Center differential lock display malfunction | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Transfer system | ||
| Combination meter assembly | ||
| Rear differential lock display malfunction | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Transfer system | ||
| Combination meter assembly | ||
| Turn-by-turn navigation display malfunction*18 | Navigation system (for Radio and Display Type) | |
| Navigation system (for Navigation Receiver Type) | ||
| Combination meter assembly | ||
| Compass display malfunction*18 | Navigation system (for Radio and Display Type) | |
| Navigation system (for Navigation Receiver Type) | ||
| Combination meter assembly | ||
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** km SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** MILES SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** km SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** MILES SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW NO START IN **** km! FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW NO START IN **** MILES! FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue EMPTY UNABLE TO RESTART ENGINE FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "EMISSIONS TOO HIGH CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "EMISSIONS TOO HIGH NO START IN **** km! CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "EMISSIONS TOO HIGH NO START IN **** MILES! CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "EMISSIONS TOO HIGH UNABLE TO RESTART ENGINE CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*19 | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "DPF FULL SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV) | |
| ECD system (1GD-FTV, w/ Urea SCR System) | ||
| ECD system (1GD-FTV) | ||
| Combination meter assembly | ||
| "DPF FULL VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV) | |
| ECD system (1GD-FTV, w/ Urea SCR System) | ||
| ECD system (1GD-FTV, w/o Urea SCR System) | ||
| Combination meter assembly | ||
| "MANUAL REGENERATION IN PROCESS KEEP FLAMMABLES AWAY FROM VEHICLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV) | |
| ECD system (1GD-FTV, w/ Urea SCR System) | ||
| ECD system (1GD-FTV, w/o Urea SCR System) | ||
| Combination meter assembly | ||
| "DPF REGENERATION IN PROCESS" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV) | |
| ECD system (1GD-FTV, w/ Urea SCR System) | ||
| ECD system (1GD-FTV) | ||
| Combination meter assembly | ||
| "DPF MANUAL REGENERATION AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV) | |
| ECD system (1GD-FTV, w/ Urea SCR System) | ||
| ECD system (1GD-FTV) | ||
| Combination meter assembly | ||
| "DPF FULL MANUAL REGENERATION REQUIRED SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly*20 | ECD system (for 1KD-FTV, w/ DPF) | |
| ECD system (1GD-FTV, w/ Urea SCR System) | ||
| ECD system (1GD-FTV) | ||
| Combination meter assembly |
*1: w/ Air Suspension System
*2: w/ Sliding Roof System
*3: for Automatic Transmission
*4: w/ Entry and Start System
*5: for Manual Transmission
*6: w/ Dynamic Radar Cruise Control System
*7: w/ Cruise Control System
*8: w/ Pre-crash Safety System
*9: w/ TOYOTA Parking Assist-sensor System
*10: w/ Blind Spot Monitor System
*11: for 1KD-FTV
*12: for 1GD-FTV
*13: for 1GR-FE, Europe
*14: w/ CRAWL Control
*15: for Europe
*16: for LED Headlight
*17: w/ Washer Fluid Level Warning System
*18: w/ Navigation System
*19: w/ Urea SCR System
*20: w/ DPF
| Symptom | Suspected Area | See page |
|---|---|---|
| Multi-information display does not light up (combination meter operates normally) | Check indicator/warning light | |
| Combination meter assembly | ||
| Multi-information display malfunction (all warning displays come on, cruise information display does not come on and outside temperature display indicates "F") | CAN communication system (for LHD with Entry and Start System) | |
| CAN communication system (for LHD without Entry and Start System) | ||
| CAN communication system (for RHD with Entry and Start System) | ||
| CAN communication system (for RHD without Entry and Start System) | ||
| Combination meter assembly | ||
| "ENGINE OIL PRESSURE LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Engine oil pressure switch assembly (for 1GD-FTV) | |
| Combination meter assembly | ||
| "RELEASE PARKING BRAKE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (Brake warning light operate normally) | Combination meter assembly | |
| "HIGH TRANSMISSION FLUID TEMPERATURE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Automatic Transmission) | Automatic transmission system (for AC60F, 1GD-FTV) | |
| Combination meter assembly | ||
| "CHECK TRANSMISSION SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Automatic Transmission) | Automatic transmission system (for AC60F, 1GD-FTV) | |
| Combination meter assembly | ||
| "KEY NOT DETECTED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "DEPRESS BRAKE PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Automatic Transmission) | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "DEPRESS CLUTCH PEDAL, TOUCH ENGINE SWITCH WITH KEY" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for Manual Transmission) | Entry and start system (for Entry and Start System) | |
| Entry and start system (for Start Function) | ||
| Combination meter assembly | ||
| "ENGINE OIL LOW" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Engine oil level sensor (for 1GD-FTV) | |
| Engine oil level sensor (for 1KD-FTV) | ||
| Combination meter assembly | ||
| "FUEL FILTER MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Fuel filter assembly (sedimenter switch) (for 1GD-FTV) | |
| Combination meter assembly | ||
| "DRAIN WATER FROM FUEL FILTER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | Level warning switch (for 1GD-FTV) | |
| Combination meter assembly | ||
| "OIL MAINTENANCE REQUIRED SOON" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "OIL MAINTENANCE REQUIRED" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| Oil maintenance required reset message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| Oil maintenance reset complete message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| Oil maintenance reset unfinished message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "CHECK HEADLIGHT SYSTEM" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (for LED Headlight) | Lighting system | |
| Combination meter assembly | ||
| "LOW WASHER FLUID" message is displayed when it should not be, not displayed when it should be, or not displayed correctly (w/ Washer Fluid Level Warning System) | Level warning switch assembly | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** km SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** MILES SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** km SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW FILL UP AdBlue IN **** MILES SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW NO START IN **** km! FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue LEVEL LOW NO START IN **** MILES! FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "AdBlue EMPTY UNABLE TO RESTART ENGINE FILL UP AdBlue SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "EMISSIONS TOO HIGH CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "EMISSIONS TOO HIGH NO START IN **** km! CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "EMISSIONS TOO HIGH NO START IN **** MILES! CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "EMISSIONS TOO HIGH UNABLE TO RESTART ENGINE CHECK AdBlue VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "DPF FULL SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "DPF FULL VISIT YOUR DEALER" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "MANUAL REGENERATION IN PROCESS KEEP FLAMMABLES AWAY FROM VEHICLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "DPF REGENERATION IN PROCESS" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "DPF MANUAL REGENERATION AVAILABLE" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly | ||
| "DPF FULL MANUAL REGENERATION REQUIRED SEE OWNER'S MANUAL" message is displayed when it should not be, not displayed when it should be, or not displayed correctly | ECD system (for 1GD-FTV, w/ Urea SCR System) | |
| Combination meter assembly |
| Symptom | Suspected Area | See page |
|---|---|---|
| All buzzers do not operate normally | Combination meter assembly | |
| Seat belt warning buzzer does not operate (Front seat belt warning light operates normally) | Check customize setting | |
| Combination meter assembly | ||
| Shift down reject buzzer does not operate*1 | Automatic transmission system (for 1GR-FE) | |
| Automatic transmission system (for 2TR-FE) | ||
| Automatic transmission system (for 1GD-FTV) | ||
| Combination meter assembly | ||
| Key reminder buzzer does not operate*2 | Key reminder warning system | |
| Sliding roof open warning buzzer does not operate*3 | Sliding roof control system | |
| Combination meter assembly | ||
| Driving with parking brake unreleased warning buzzer does not operate (Speedometer and brake warning light are operate normally) | Combination meter assembly | |
| Driving with any door opened warning buzzer does not operate (Speedometer and open door warning light operate normally) | Combination meter assembly | |
| Multi-information display warning buzzer does not operate | Combination meter assembly | |
| Entry and start system warning buzzer does not operate*4 | Entry and start system | |
| Combination meter assembly | ||
| Engine immobiliser certification buzzer does not operate | Engine immobiliser system (w/ Entry and Start System) | |
| Engine immobiliser system (w/o Entry and Start System) | ||
| Combination meter assembly | ||
| Light reminder buzzer does not operate*5 | Combination meter assembly | |
| Dynamic radar cruise control low speed cancel buzzer does not operate*6 | Dynamic radar cruise control system | |
| Combination meter assembly | ||
| Dynamic radar cruise control warning buzzer does not operate*6 | Dynamic radar cruise control system | |
| Combination meter assembly | ||
| 4WD buzzer does not operate | Transfer system | - |
| Combination meter assembly | ||
| Shift position R buzzer does not operate*7 | Back-up light switch | |
| Combination meter assembly | ||
| Speed limit exceeded buzzer does not operate*8 | Speed signal circuit | |
| Combination meter assembly | ||
| SEDIMENT buzzer does not operate (SEDIMENT warning light operate normally)*9 | Combination meter assembly | |
| Master warning buzzer does not operate (Master warning light operate normally)*10 | Combination meter assembly | |
| VSC buzzer does not operate*11 | Vehicle stability control system (for Hydraulic Brake Booster) | |
| Vehicle stability control system (for Vacuum Brake Booster) | ||
| Combination meter assembly |
*1: for Automatic Transmission (AC60F)
*2: w/o Entry and Start System
*3: w/ Sliding Roof System
*4: w/ Entry and Start System
*5: w/ Light Reminder System
*6: w/ Dynamic Radar Cruise Control System
*7: for Manual Transmission (RA61F)
*8: for Middle East
*9: w/ SEDIMENT Warning Light
*10: except Analog Meter, Segment Display Type
*11: w/ VSC
| Symptom | Suspected Area | See page |
|---|---|---|
| Other systems that use speed signal do not operate normally | Speed signal circuit | |
| Customizable parameters cannot be changed (customizable parameters can be changed by using intelligent tester) | Combination meter assembly |