FUEL PUMP(for Double Tank Type) REASSEMBLY

CAUTION / NOTICE / HINT

Note

Do not disconnect the hoses indicated in the illustration.

B001CZH

Tech Tips

for Automatic Transmission:

Perform "Inspection After Repairs" after replacing the fuel pump.

Click here

PROCEDURE


  1. INSTALL FUEL MAIN VALVE ASSEMBLY


    1. B001CCAE01
      Text in Illustration
      *1 New O-Ring

      Apply a light coat of gasoline to 2 new O-rings and install the O-ring to the fuel main valve.

    2. Install the fuel main valve to the fuel filter case.

      Note

      Make sure the O-rings are not cut or pinched during installation.

  2. INSTALL FUEL PUMP

    Tech Tips

    for Automatic Transmission:

    Perform "Inspection After Repairs" after replacing the fuel pump.

    Click here


    1. Connect the fuel pump wire harness connector to the fuel pump.

    2. B001HRRE01
      Text in Illustration
      *1 New O-Ring
      *2 Fuel Pump Spacer

      Apply a light coat of gasoline to a new O-ring. Then install the fuel pump spacer and O-ring to the fuel pump.

    3. B001G7ZE01
      Text in Illustration
      *1 Fuel Filter Case

      Attach the 5 claws to the claw holes to install the fuel pump to the fuel filter case.

  3. INSTALL NO. 1 FUEL SUB-TANK


    1. B001GLO

      Attach the 3 claws to the claw holes to install the No. 1 fuel sub-tank.

    2. B001GOD

      Attach the 3 claws to the claw holes.

    3. Connect the jet pump labeled B to the No. 1 fuel sub-tank.


      1. B001DK6E01
        Text in Illustration
        *1 Jet Pump A
        *2 Jet Pump B

        Attach the claw on the end of the tube to the claw hole.

    4. Connect the jet pump labeled A to the No. 1 fuel sub-tank.

    5. Connect the fuel pump connector.

  4. INSTALL FUEL SENDER GAUGE ASSEMBLY

    Click here