FUEL PRESSURE PULSATION DAMPER INSTALLATION

PROCEDURE


  1. INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY


    1. B001ESUE01
      Text in Illustration
      *1 New O-Ring

      Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure pulsation damper.

    2. Install the fuel pressure pulsation damper to the fuel delivery pipe.

    3. Install the fuel pressure regulator holder.

  2. INSTALL INTAKE AIR SURGE TANK


    1. Install the intake air surge tank Click here.

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. INSPECT FOR FUEL LEAK

    Click here