FUEL SENDER GAUGE ASSEMBLY(for Single Tank Type) INSTALLATION

PROCEDURE


  1. INSTALL FUEL SENDER GAUGE ASSEMBLY


    1. B001HGSC01
      *1 No. 1 Fuel Sub-Tank
      B001CHY Slide

      Set the fuel sender gauge assembly on the No. 1 fuel sub-tank. Then slide the fuel sender gauge assembly downward to install it.

    2. Connect the fuel sender gauge connector.

  2. INSTALL FUEL SUCTION WITH PUMP AND GAUGE TUBE ASSEMBLY


    1. Install the fuel suction with pump and gauge tube assembly.

      Click here