FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL TIMING CHAIN CASE OIL SEAL


    1. B001EWKE01

      Apply MP grease to the lip of a new timing chain case oil seal.

      Note


      • Do not allow foreign matter to contact the lip of the timing chain case oil seal.

      • Do not allow MP grease to contact the dust seal.

    2. Temporarily install the timing chain case oil seal to the timing chain cover sub-assembly.

    3. Using SST and a hammer, tap in the timing chain case oil seal until its surface is flush with the chain cover edge.

      SST
      09223-75010
      09950-70010   ( 09951-07100 )

      Note


      • Keep the lip free from foreign matter.

      • Do not tap the timing chain case oil seal at an angle.

  2. INSTALL CRANKSHAFT PULLEY


    1. B001I8AE01
      Text in Illustration
      *a Hold
      B001CHY Turn

      Align the key groove of the crankshaft pulley with the pulley set key and slide on the crankshaft pulley.

    2. Using SST, install a new crankshaft pulley bolt.

      SST
      09213-54015   ( 91651-60855 )
      09330-00021
      Torque:
      260 N*m  { 2651 kgf*cm, 192 ft.*lbf }

      Note

      Do not reuse the pulley bolt.

  3. INSTALL FAN SHROUD

    Click here

  4. INSTALL RADIATOR RESERVOIR

    Click here

  5. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here

  6. INSPECT FOR OIL LEAK

    Click here

  7. INSPECT ENGINE OIL LEVEL

    Click here