DRIVE BELT REMOVAL

PROCEDURE


  1. REMOVE FAN AND GENERATOR V BELT


    1. A01XJUA

      Use the hexagonal part indicated by the arrow in the illustration to move the tensioner pulley downward and decrease the tension in the fan and generator V belt. Then remove the fan and generator V belt.

      Note

      When removing the fan and generator V belt, do not use the bolt of the idle pulley.

      Tech Tips

      After removing the fan and generator V belt, move the tensioner upward to the maximum amount.

  2. REMOVE TENSIONER PULLEY

    Note

    Perform the following procedure when it is necessary to replace the tensioner pulley.


    1. A01XD0M

      Remove the bolt, dust seal and tensioner pulley.