FRONT CRANKSHAFT OIL SEAL INSTALLATION

PROCEDURE


  1. INSTALL FRONT CRANKSHAFT OIL SEAL


    1. Apply MP grease to the lip of a new crankshaft oil seal.

      Note

      Keep the lip free of foreign objects.

    2. A01XJF3E01

      Using SST and a hammer, tap in the crankshaft oil seal until its surface is flush with the timing gear cover edge.

      SST
      09214-76011

      Note


      • Do not tap the oil seal at an angle.

      • Wipe off extra grease on the crankshaft.

  2. INSTALL CRANKSHAFT PULLEY


    1. Align the keyway of the pulley with the key located on the crankshaft, and then slide the pulley into place to install it.

    2. A01XCJDE01

      Using SST, install the pulley bolt.

      SST
      09213-58014
      09330-00021
      Torque:
      365 N*m  { 3722 kgf*cm, 269 ft.*lbf }

  3. INSTALL FAN SHROUD

    Click here

  4. INSTALL NO. 1 RADIATOR HOSE

    Click here

  5. ADD ENGINE COOLANT

    Click here

  6. INSPECT FOR COOLANT LEAK

    Click here

  7. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  8. INSTALL FRONT BUMPER LOWER COVER

    Click here