CRANKSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL CRANKSHAFT POSITION SENSOR

   
   

   1. Apply a light coat of engine oil to the O-ring of the crankshaft position sensor.

   2. Install the crankshaft position sensor with the bolt.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

      Note

      
      

      • When reusing the crankshaft position sensor, inspect the O-ring.

      • Make sure that the O-ring is not cracked or jammed when installing the crankshaft position senor.

   3. Connect the crankshaft position sensor connector and attach the wire harness clamp.

2. INSTALL NO. 1 COMPRESSOR MOUNTING BRACKET

   Click here

3. CONNECT COOLER COMPRESSOR ASSEMBLY

   Click here

4. CONNECT VANE PUMP ASSEMBLY

   Click here

5. INSTALL FAN SHROUD

   Click here