CRANKSHAFT POSITION SENSOR INSPECTION

PROCEDURE


  1. INSPECT CRANKSHAFT POSITION SENSOR


    1. A01XLH7E16
      Text in Illustration
      *a

      Component without harness connected

      (Crankshaft Position Sensor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      1 (NE+) - 2 (NE-) Cold 1630 to 2740 Ω
      Hot 2065 to 3225 Ω

      Tech Tips

      In the table above, the terms "cold" and "hot" refer to the temperature of the sensor. "Cold" means approximately -10 to 50°C (14 to 122°F). "Hot" means approximately 50 to 100°C (122 to 212°F).

      If the result is not as specified, replace the crankshaft position sensor.