CAMSHAFT OIL CONTROL VALVE INSTALLATION

PROCEDURE

1. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Exhaust Side)

   
   

   1. Apply a light coat of engine oil to a new O-ring and install the O-ring to the camshaft timing oil control valve assembly.

      Note

      Do not damage the O-ring when installing.

      Tech Tips

      An O-ring is already installed in a new camshaft timing oil control valve assembly. So, the O-ring only needs to be coated with engine oil when the assembly is replaced with a new one.

   2. Install the camshaft timing oil control valve assembly to the cylinder head cover sub-assembly with the bolt.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

      Note

      
      

      • Replace with a new part if it is dropped or if it receives a strong impact.

      • Make sure that the O-ring is not cracked or jammed when installing.

   3. Connect the camshaft timing oil control valve connector.

2. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY (for Intake Side)

   
   

   1. Apply a light coat of engine oil to a new O-ring and install the O-ring to the camshaft timing oil control valve assembly.

      Note

      Do not damage the O-ring when installing.

      Tech Tips

      An O-ring is already installed in a new camshaft timing oil control valve assembly. So, the O-ring only needs to be coated with engine oil when the assembly is replaced with a new one.

   2. Install the camshaft timing oil control valve assembly to the cylinder head sub-assembly with the bolt.

      Torque:

      9.0 N*m  { 92 kgf*cm, 80 in.*lbf }

      Note

      
      

      • Replace with a new part if it is dropped or if it receives a strong impact.

      • Make sure that the O-ring is not cracked or jammed when installing.

   3. Connect the camshaft timing oil control valve connector.

   4. Connect the wiring harness clamp bracket with the bolt.

      Torque:

      8.0 N*m  { 82 kgf*cm, 71 in.*lbf }

   5. Attach the 2 clamps and connect the 2 connectors.