AIR FUEL RATIO SENSOR INSTALLATION

PROCEDURE


  1. INSTALL AIR FUEL RATIO SENSOR

    Tech Tips

    Perform "Inspection After Repairs" after replacing the air fuel ratio sensor.



    1. A01XHZ9E02
      Text in Illustration
      *a Torque Wrench Fulcrum Length

      Using SST, install the air fuel ratio sensor to the front exhaust pipe.

      SST
      09224-00011
      Torque:
      Specified tightening torque
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }

      Tech Tips


      • Calculate the torque wrench reading when changing the fulcrum length of the torque wrench Click here.

      • When using SST (fulcrum length of 30 mm (1.18 in.)) + torque wrench (fulcrum length of 180 mm (7.09 in.)): 38 N*m (384 kgf*cm, 28 ft.*lbf)

    2. Connect the connector and 2 clamps.

  2. INSTALL NO. 1 FRONT FENDER APRON TO FRAME SEAL RH


    1. Install the No. 1 front fender apron to frame seal RH with the 5 clips.