DIESEL THROTTLE BODY REMOVAL

PROCEDURE


  1. DISCONNECT INLET HEATER WATER HOSE


    1. A01XI7F

      Remove the bolt and disconnect the inlet heater water hose.

  2. DISCONNECT NO. 4 VACUUM TRANSMITTING PIPE SUB-ASSEMBLY


    1. A01XD1C

      Remove the bolt and disconnect the No. 4 vacuum transmitting pipe.

  3. REMOVE NO. 1 INTAKE PIPE


    1. A01XF80

      Disconnect the 3 connectors from the intake air temperature sensor, throttle control motor and manifold absolute pressure sensor.

    2. Detach the 2 clamps.

    3. Disconnect the vacuum hose from the manifold absolute pressure sensor.

    4. A01XJ7R

      Loosen the 2 hose clamps of the No. 1 air hose.

    5. A01XHZF

      Loosen the hose clamp of the intercooler air hose.

    6. A01XD91

      Remove the 2 bolts and No. 1 intake pipe.

  4. REMOVE DIESEL THROTTLE BODY ASSEMBLY


    1. A01XLXA

      Disconnect the throttle position sensor connector.

    2. A01XL6C

      Remove the 2 bolts, 2 nuts, diesel throttle body and gasket.