AIR FUEL RATIO SENSOR INSTALLATION

CAUTION / NOTICE / HINT

PROCEDURE

1. INSTALL AIR FUEL RATIO SENSOR (for Bank 2 Sensor 1)

   Tech Tips

   for Automatic Transmission:

   Perform "Inspection After Repairs" after replacing the air fuel ratio sensor Click here.

   
   
   1. 

      Text in Illustration

      *a	Fulcrum Length

      Using SST, install the sensor.

      SST

      09224-00010

      Torque:

      without SST

      44 N*m  { 449 kgf*cm, 32 ft.*lbf }

      with SST

      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips

      
      

      • Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). When using a torque wrench with a fulcrum length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

      • Make sure SST and the wrench are connected in a straight line.

2. INSTALL AIR FUEL RATIO SENSOR (for Bank 1 Sensor 1)

   Tech Tips

   for Automatic Transmission:

   Perform "Inspection After Repairs" after replacing the air fuel ratio sensor Click here.

   
   
   1. 

      Text in Illustration

      *a	Fulcrum Length

      Using SST, install the sensor.

      SST

      09224-00010

      Torque:

      without SST

      44 N*m  { 449 kgf*cm, 32 ft.*lbf }

      with SST

      40 N*m  { 408 kgf*cm, 30 ft.*lbf }

      Tech Tips

      
      

      • Use a torque wrench with a fulcrum length of 30 cm (11.8 in.). When using a torque wrench with a fulcrum length that is not 30 cm (11.8 in.), calculate the torque specification for the torque wrench and SST based on the "without SST" torque specification Click here.

      • Make sure SST and the wrench are connected in a straight line.

3. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY

   
   

   1. Install the exhaust manifold Click here.