IGNITION COIL AND SPARK PLUG INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips

for Automatic Transmission:

Perform "Inspection After Repairs" after replacing the ignition coil assembly or spark plug Click here.

PROCEDURE


  1. INSTALL SPARK PLUG

    Tech Tips

    for Automatic Transmission:

    Perform "Inspection After Repairs" after replacing the spark plug Click here.


    1. Install the 6 spark plugs.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  2. INSTALL IGNITION COIL ASSEMBLY

    Tech Tips

    for Automatic Transmission:

    Perform "Inspection After Repairs" after replacing the ignition coil assembly Click here.


    1. Install the 6 ignition coils with the 6 bolts.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    2. Connect the 6 ignition coil connectors.

  3. INSTALL NO. 2 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)

    Click here

  4. INSTALL NO. 2 AIR TUBE (w/ Secondary Air Injection System)

    Click here

  5. INSTALL EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)

    Click here

  6. INSTALL AIR TUBE (w/ Secondary Air Injection System)

    Click here

  7. INSTALL AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  8. INSTALL AIR CLEANER CAP AND HOSE


    1. B001EK4E01
      Text in Illustration
      *a Top
      *b Front
      *c RH
      *d Align cutout portion of hose with protrusion of throttle
      *e Paint Mark

      Install the air cleaner cap and hose.


      1. Install the air cleaner cap and hose with the bolt and fasten the 4 hook clamps.

        Torque:
        5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      2. Tighten the clamp.

        Torque:
        5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

      3. Attach the 4 clamps and connect the ventilation hose, vacuum hose and mass air flow meter connector.

        Tech Tips

        The direction of the hose clamp is indicated in the illustration.

  9. INSTALL V-BANK COVER

    Click here

  10. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here