IGNITION COIL AND SPARK PLUG REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE V-BANK COVER

    Click here

  3. REMOVE AIR CLEANER CAP AND HOSE


    1. B001HZ8

      Remove the air cleaner cap and hose.


      1. Disconnect the mass air flow meter connector, vacuum hose and ventilation hose and detach the 4 clamps.

      2. Loosen the clamp.

      3. Unfasten the 4 hook clamps, and then remove the bolt and air cleaner cap and hose.

  4. REMOVE AIR CLEANER CASE SUB-ASSEMBLY

    Click here

  5. REMOVE AIR TUBE (w/ Secondary Air Injection System)

    Click here

  6. REMOVE EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)

    Click here

  7. REMOVE NO. 2 AIR TUBE (w/ Secondary Air Injection System)

    Click here

  8. REMOVE NO. 2 EMISSION CONTROL VALVE SET (w/ Secondary Air Injection System)

    Click here

  9. REMOVE IGNITION COIL ASSEMBLY


    1. B001HPJ

      Disconnect the 6 ignition coil connectors.

    2. Remove the 6 bolts and 6 ignition coils.

  10. REMOVE SPARK PLUG


    1. Remove the 6 spark plugs.