CRANKSHAFT POSITION SENSOR REMOVAL

PROCEDURE


  1. REMOVE GENERATOR ASSEMBLY


    1. Remove the generator Click here.

  2. REMOVE COOLER COMPRESSOR ASSEMBLY (w/ Air Conditioning System)


    1. Remove the cooler compressor Click here.

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE IDLER PULLEY ASSEMBLY (w/o Air Conditioning System)


    1. Remove the 3 bolts and idler pulley.

  5. REMOVE CRANKSHAFT POSITION SENSOR


    1. B001GB3

      Disconnect the sensor connector.

    2. Remove the bolt and sensor.