CAMSHAFT POSITION SENSOR INSTALLATION

PROCEDURE

1. INSTALL VVT SENSOR (for Exhaust Side of Bank 2)

   
   

   1. Apply a light coat of engine oil to the O-ring of the VVT sensor.

      Note

      
      

      • When reusing the sensor, inspect the O-ring.

      • If the O-ring has scratches or cuts, replace the sensor.

   2. Install the VVT sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the sensor connector.

2. INSTALL VVT SENSOR (for Intake Side of Bank 2)

   
   

   1. Apply a light coat of engine oil to the O-ring of the sensor.

      Note

      
      

      • When reusing the sensor, inspect the O-ring.

      • If the O-ring has scratches or cuts, replace the sensor.

   2. Install the sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the sensor connector.

3. INSTALL VVT SENSOR (for Exhaust Side of Bank 1)

   
   

   1. Apply a light coat of engine oil to the O-ring of the sensor.

      Note

      
      

      • When reusing the sensor, inspect the O-ring.

      • If the O-ring has scratches or cuts, replace the sensor.

   2. Install the sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the sensor connector.

4. INSTALL VVT SENSOR (for Intake Side of Bank 1)

   
   

   1. Apply a light coat of engine oil to the O-ring of the sensor.

      Note

      
      

      • When reusing the sensor, inspect the O-ring.

      • If the O-ring has scratches or cuts, replace the sensor.

   2. Install the sensor with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

   3. Connect the sensor connector.

5. INSTALL NO. 1 AIR CLEANER HOSE

   Click here

6. INSTALL V-BANK COVER

   Click here