THROTTLE BODY INSPECTION

PROCEDURE


  1. INSPECT THROTTLE BODY WITH MOTOR ASSEMBLY


    1. A01XJ22E09
      Text in Illustration
      *a

      Component without harness connected

      (Throttle Body with Motor)

      Measure the resistance according to the value(s) in the table below.

      Standard Resistance
      Tester Connection Condition Specified Condition
      2 (M+) - 1 (M-) 20°C (68°F) 0.3 to 100 Ω

      If the result is not as specified, replace the throttle body with motor assembly.