THROTTLE BODY REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE FRONT BUMPER COVER LOWER

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE V-BANK COVER

    Click here

  6. REMOVE NO. 1 AIR CLEANER HOSE

    Click here

  7. REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY


    1. B001CKD

      Disconnect the No. 5 water by-pass hose.

    2. B001FH9

      Disconnect the No. 4 water by-pass hose.

    3. B001EKY

      Disconnect the throttle position sensor and throttle control motor connector.

    4. Remove the 4 bolts, throttle body with motor and gasket.