| Battery | Standard specific gravity | 1.25 to 1.29 at 20°C (68°F) | ||
| Standard voltage | 1.25 to 1.29 V at 20°C (68°F) | |||
| Fuse | Standard resistance | Below 1 Ω | ||
| Charging circuit without load | Standard current | 10 A or higher | ||
| Standard voltage | 13.5 to 14.35 V (when engine speed at 2000 rpm) |
|||
| Charging circuit with load | Standard current | 30 A or higher | ||
| brush holder | Standard exposed length | 9.5 to 11.5 mm (0.374 to 0.453 in.) | ||
| Minimum exposed length | 4.5 mm (0.177 in.) | |||
| Generator rotor | Standard resistance | Between the slip rings | for 130 A Type | 1.55 to 1.95 Ω at 20°C (68°F) |
| for 100 A Type | 1.8 to 2.2 Ω at 20°C (68°F) | |||
| Between the slip ring and rotor core | 10 kΩ or higher | |||
| Standard diameter | 14.2 to 14.8 mm (0.559 to 0.583 in.) | |||
| Minimum diameter | 14.0 mm (0.551 in.) | |||
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| C171-7(LIN) - C173-2(LIN) | Always | Below 1 Ω |
| C171-7(LIN) - C173-2(LIN) - Body ground | Engine switch off (while LIN communication is stopped) |
10 kΩ or higher |