| Part Tightened | N*m | kgf*cm | ft.*lbf |
|---|---|---|---|
| Retainer plate x Generator drive end frame assembly | 2.3 | 23 | 20 in.*lbf |
| Generator coil assembly x Generator drive end frame assembly | 5.9 | 60 | 52 in.*lbf |
| Generator brush holder assembly x Generator coil assembly | 1.8 | 18 | 16 in.*lbf |
| Generator rear end cover x Generator coil assembly | 4.6 | 46 | 40 in.*lbf |
| Cord clip x Generator rear end cover | 6.2 | 63 | 55 in.*lbf |
| Generator with clutch pulley x Generator rotor assembly | 80 (64) | 816 (653) | 59 (47) |
| Generator bracket x Generator assembly | 20 | 204 | 15 |
| Generator assembly x Timing chain cover | 43 | 438 | 32 |
| Generator bracket x Cylinder block | 20 | 204 | 15 |
| Wire harness x Generator assembly | 8.0 | 82 | 71 in.*lbf |
| Generator wire x Generator assembly | 9.8 | 100 | 87 in.*lbf |
| Wiring harness clamp bracket x Body | 8.0 | 82 | 71 in.*lbf |
| No. 2 idler pulley x Timing chain cover | 54 | 551 | 40 |
| Battery hold down clamp x Body | 6.0 | 61 | 53 in.*lbf |
| Positive (+) battery terminal x Positive (+) battery cable | 5.4 | 55 | 48 in.*lbf |
| Negative (-) battery terminal x Negative (-) battery cable | 5.4 | 55 | 48 in.*lbf |
( ): For use with SST