1KD-FTV FUEL SERVICE DATA

FUEL INJECTOR
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.42 to 0.52 Ω
FUEL SUPPLY PUMP
Item Tester Connection Condition Specified Condition
Suction control valve 1 - 2 20°C (68°F) 1.9 to 2.3 Ω
COMMON RAIL
Item Tester Connection Condition Specified Condition
Fuel pressure sensor 2 - 3 25°C (77°F) 16.4 kΩ or less
5 - 4 16.4 kΩ or less
1 - 2 3 kΩ or less
6 - 5 3 kΩ or less
Pressure discharge valve 1 - 2 20°C (68°F) 0.85 to 1.05 Ω
FUEL TEMPERATURE SENSOR
Item Tester Connection Condition Specified Condition
Fuel temperature sensor 1 - 2 20°C (68°F) 2.32 to 2.59 kΩ
80°C (176°F) 0.310 to 0.326 kΩ
FUEL FILTER (for Engine Room Side)
Item Tester Connection Condition Specified Condition
Fuel heater assembly 2 - Heater body 20°C (68°F) 0.5 to 2.0 Ω
Fuel filter cap assembly 1 - 2 20°C (68°F) Below 1 Ω
FUEL PUMP (for Double Tank Type)
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.2 to 3.0 Ω
FUEL SENDER GAUGE ASSEMBLY (for Single Tank Type)
Item Tester Connection Condition Specified Condition
Fuel sender gauge assembly 2 - 3 Float position is F (upper) 4.255 to 4.605 V*
Float position is E (lower) 0.345 to 0.695 V*

*: The output voltage changes depending on the voltage applied to the terminals.

FUEL SENDER GAUGE ASSEMBLY (for Double Tank Type)
Item Tester Connection Condition Specified Condition
Fuel sender gauge assembly (for Fuel Main Tank) 2 - 3 Float position is F (upper) 4.255 to 4.605 V*
Float position is E (lower) 0.345 to 0.695 V*
Fuel sender gauge assembly (for Fuel Sub Tank) FE (Black) - FR (Green) Float position is F (upper) 4.255 to 4.605 V*
Float position is E (lower) 0.345 to 0.695 V*

*: The output voltage changes depending on the voltage applied to the terminals.

FUEL SEDIMENTER WARNING SWITCH
Tester Connection Condition Specified Condition
1 - 2 On Below 0.5 Ω
Off 1 MΩ or higher