1GR-FE FUEL SERVICE DATA

Fuel pressure	Standard fuel pressure	at idle		321 to 327 kPa (3.27 to 3.33 kgf/cm², 46.5 to 47.4 psi)
		remains for 5 minutes after engine has stopped		147 kPa (1.5 kgf/cm², 21 psi) or higher
Fuel injector	Standard resistance		Tester Connection	Condition	Specified Condition
			1 - 2	20°C (68°F)	11.6 to 12.4 Ω
	Standard injection volume		89 to 107 cm³(5.4 to 6.5 cu. in.) per 15 seconds
	Difference between each injector		15 cm³(0.9 cu. in.) or less
	Standard fuel leakage		1 drop or less per 12 minutes
Fuel pump (for Single Tank Type)		Standard resistance	Tester Connection	Condition	Specified Condition
			1 - 2	20°C (68°F)	0.2 to 3.0 Ω
Fuel pump (for Double Tank Type)		Standard resistance	Tester Connection	Condition	Specified Condition
			1 - 2	20°C (68°F)	0.2 to 3.0 Ω
Fuel sender gauge assembly (for Single Tank Type)		Standard resistance	Tester Connection	Condition	Specified Condition
			2 (FE) - 3 (FR)	Float position is F (upper)	4.255 to 4.605 V*
				Float position is E (lower)	0.345 to 0.695 V*
Fuel sender gauge assembly (for Double Tank Type)	for Fuel Main Tank	Standard resistance	Tester Connection	Condition	Specified Condition
			2 (FE) - 3 (FR)	Float position is F (upper)	4.255 to 4.605 V*
				Float position is E (lower)	0.345 to 0.695 V*
	for Fuel Sub Tank	Standard resistance	Tester Connection	Condition	Specified Condition
			2 (FE) - 3 (FR)	Float position is F (upper)	4.255 to 4.605 V*
				Float position is E (lower)	0.345 to 0.695 V*

*: The output voltage changes depending on the voltage applied to the terminals.