OIL PRESSURE SWITCHING VALVE INSTALLATION

PROCEDURE

1. INSTALL OIL PRESSURE SWITCHING VALVE ASSEMBLY

   
   

   1. Apply a light coat of engine oil to the O-ring of the oil pressure switching valve.

   2. Install the oil pressure switching valve with the bolt.

      Torque:

      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

      Note

      Make sure that the O-ring is not cracked or jammed when installing the valve.

   3. Connect the oil pressure switching valve connector.

2. ADD ENGINE OIL

   Click here

3. INSPECT FOR OIL LEAK

   Click here

4. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

   Click here

5. INSTALL FRONT BUMPER LOWER COVER

   Click here