RADIATOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 RADIATOR TO SUPPORT SEAL


    1. B001I3B

      Install the No. 1 radiator to support seal to the radiator assembly as shown in the illustration.

  2. INSTALL NO. 2 RADIATOR TO SUPPORT SEAL


    1. B001CES

      Install the No. 2 radiator to support seal to the radiator assembly as shown in the illustration.

  3. INSTALL NO. 2 RADIATOR SUPPORT


    1. B001DVT

      Install the 2 No. 2 radiator supports and 2 No. 1 radiator support bushes as shown in the illustration.

  4. INSTALL NO. 1 RADIATOR SUPPORT


    1. B001IIL

      Install the 2 No. 1 radiator supports and 2 No. 1 radiator support bushes as shown in the illustration.

  5. INSTALL RADIATOR ASSEMBLY


    1. B001EDG

      Insert the No. 1 radiator support hooks into the radiator support holes.

    2. Install the radiator assembly with the 4 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  6. CONNECT OIL COOLER OUTLET HOSE (for Automatic Transmission)


    1. B001D9OE03
      Text in Illustration
      *a Upper
      *b LH Side
      *c Paint Mark

      Connect the oil cooler outlet hose to the radiator assembly, and slide the hose clamp to secure the hose.

      Tech Tips

      Make sure the direction of the hose clamp is as shown in the illustration.

  7. CONNECT OIL COOLER INLET HOSE (for Automatic Transmission)


    1. Connect the oil cooler inlet hose to the radiator assembly, and slide the hose clamp to secure the hose.

  8. CONNECT NO. 2 RADIATOR HOSE


    1. B001FUJE03
      Text in Illustration
      *a Upper
      *b LH Side
      *c Paint Mark

      Connect the No. 2 radiator hose to the radiator assembly, and slide the hose clamp to secure the hose.

      Tech Tips

      Make sure the direction of the hose clamp is as shown in the illustration.

  9. CONNECT NO. 1 RADIATOR HOSE


    1. B001HANE03
      Text in Illustration
      *a Upper
      *b RH Side
      *c Paint Mark

      Connect the No. 1 radiator hose to the radiator assembly, and slide the hose clamp to secure the hose.

      Tech Tips

      Make sure the direction of the hose clamp is as shown in the illustration.

  10. INSTALL FAN SHROUD


    1. Install the fan pulley to the engine water pump assembly.

    2. Place the shroud together with the coupling fan between the radiator assembly and engine.

      Note

      Be careful not to damage the radiator core.

    3. Temporarily install the fluid coupling fan to the engine water pump assembly with the 4 nuts. Tighten the nuts as much as possible by hand.

    4. B001CGC

      Attach the claws of the shroud to the radiator assembly as shown in the illustration.

    5. Install the fan shroud with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    6. Install the fan and generator V-belt.

      Click here

    7. Tighten the 4 nuts of the fluid coupling fan.

      Torque:
      25 N*m  { 255 kgf*cm, 18 ft.*lbf }
    8. B001GLG

      Attach the claw to close the flexible hose clamp as shown in the illustration.

  11. INSTALL RADIATOR RESERVOIR


    1. Install the radiator reservoir with the 3 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Connect the reservoir hose to the radiator assembly.

  12. INSTALL RADIATOR SIDE DEFLECTOR LH


    1. Attach the 3 claws.

    2. Install the radiator side deflector LH with the clip.

  13. INSTALL RADIATOR SIDE DEFLECTOR RH


    1. Attach the 3 claws.

    2. Install the radiator side deflector RH with the clip.

  14. INSTALL FRONT BUMPER CENTER UPPER RETAINER

    Click here

  15. INSTALL FRONT BUMPER COVER

    Click here

  16. ADD ENGINE COOLANT

    Click here

  17. INSPECT FOR COOLANT LEAK

    Click here

  18. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  19. INSTALL FRONT BUMPER COVER LOWER

    Click here

  20. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here