THERMOSTAT REMOVAL

PROCEDURE


  1. REMOVE FAN SHROUD

    Click here

  2. REMOVE WATER HOSE SUB-ASSEMBLY (for Cold Area Specification Vehicles)


    1. B001D5J

      Remove the bolt and disconnect the water hose sub-assembly from the water inlet.

    2. Slide the 4 hose clamps and remove the water hose sub-assembly.

  3. DISCONNECT NO. 2 WATER BY-PASS PIPE SUB-ASSEMBLY


    1. B001E1K

      Remove the 2 bolts and disconnect the No. 2 water by-pass pipe sub-assembly from the engine water pump assembly and water inlet.

  4. DISCONNECT NO. 2 RADIATOR HOSE


    1. Slide the hose clamp and disconnect the No. 2 radiator hose from the water inlet.

  5. REMOVE WATER INLET


    1. B001DCT

      Remove the 3 bolts and water inlet.

  6. REMOVE THERMOSTAT


    1. Remove the thermostat from the engine water pump sub-assembly.

    2. Remove the gasket from the thermostat.