RADIATOR INSTALLATION

PROCEDURE


  1. INSTALL NO. 1 RADIATOR TO SUPPORT SEAL


    1. B001EKI

      Install the seal to the radiator assembly as shown in the illustration.

  2. INSTALL NO. 2 RADIATOR TO SUPPORT SEAL


    1. B001EDK

      Install the seal to the radiator assembly as shown in the illustration.

  3. INSTALL RADIATOR ASSEMBLY


    1. B001FII

      Insert the radiator bracket hooks into the radiator support holes.

    2. Install the radiator with the 4 bolts.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }
    3. B001HL2E02
      Text in Illustration
      *A w/ Warmer
      *B w/ Air Cooled Transmission Oil Cooler
      *a Upper

      for Automatic Transmission:

      Connect the 2 oil cooler hoses.

      Tech Tips

      Make sure the direction of the hose clamp is as shown in the illustration.

  4. INSTALL FAN SHROUD


    1. Install the fan pulley to the water pump.

    2. Place the shroud together with the coupling fan between the radiator and engine.

      Note

      Be careful not to damage the radiator core.

    3. B001FLUE05
      Text in Illustration
      *1 Paint Mark

      Align the paint marks on the heads of the water pump stud bolts with the paint marks of the same color on the outer edge of the fluid coupling flange and install the fluid coupling to the water pump.

    4. Temporarily install the fluid coupling fan to the water pump with the 4 nuts. Tighten the nuts as much as possible by hand.

    5. B001D1H

      Attach the claws of the shroud to the radiator as shown in the illustration.

    6. Install the shroud with the 2 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    7. Install the fan and generator V-belt.

      Click here

    8. Tighten the 4 nuts of the fluid coupling fan.

      Torque:
      21 N*m  { 214 kgf*cm, 15 ft.*lbf }

  5. CONNECT OIL COOLER TUBE (w/ Air Cooled Transmission Oil Cooler)


    1. B001FYF

      Connect the oil cooler tube with the 2 bolts, and attach the claw to close the flexible hose clamp.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  6. CONNECT OIL COOLER TUBE (w/ Warmer)


    1. B001CW6

      Connect the oil cooler tube with the 2 bolts, and attach the claw to close the flexible hose clamp.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

  7. INSTALL RADIATOR RESERVOIR


    1. Install the radiator reservoir with the 3 bolts.

      Torque:
      5.0 N*m  { 51 kgf*cm, 44 in.*lbf }

    2. Connect the reservoir hose to upper side of the radiator tank upper.

  8. INSTALL NO. 2 RADIATOR HOSE


    1. B001I4IE03
      Text in Illustration
      *1 Paint Mark
      *2 Protrusion
      *a Upper

      Connect the No. 2 radiator hose so that its paint mark aligns with the radiator protrusion as shown in the illustration.

      Tech Tips


      • Make sure the paint mark of the No. 1 air injection system hose is facing upward.

      • Make sure the direction of the hose clamp is as shown in the illustration.

    2. B001I5ZE08
      Text in Illustration
      *1 Paint Mark
      *2 Protrusion
      *a Front
      *b Upper

      Connect the No. 2 radiator hose so that its paint mark aligns with the water inlet housing protrusion as shown in the illustration.

      Tech Tips


      • Make sure the paint mark of the No. 1 air injection system hose is facing upward.

      • Make sure the direction of the hose clamp is as shown in the illustration.

  9. INSTALL NO. 1 RADIATOR HOSE


    1. B001G7QE03
      Text in Illustration
      *1 Paint Mark
      *2 Protrusion
      *a Front
      *b Upper

      Connect the No. 1 radiator hose to the water inlet housing shown in the illustration labeled A.

      Tech Tips


      • Make sure the paint mark of the No. 1 radiator hose is facing upward.

      • Make sure the direction of the hose clamp is as shown in the illustration.

    2. Connect the No. 1 radiator hose so that its paint mark aligns with the radiator protrusion as shown in the illustration labeled B.

      Tech Tips


      • Make sure the paint mark of the No. 1 radiator hose is facing upward.

      • Make sure the direction of the hose clamp is as shown in the illustration.

  10. INSTALL RADIATOR SIDE DEFLECTOR LH


    1. Attach the 3 claws.

    2. Install the deflector with the clip.

  11. INSTALL RADIATOR SIDE DEFLECTOR RH


    1. Attach the 3 claws.

    2. Install the deflector with the clip.

  12. INSTALL FRONT BUMPER CENTER UPPER RETAINER

    Click here

  13. INSTALL FRONT BUMPER COVER

    Click here

  14. ADD ENGINE COOLANT

    Click here

  15. INSPECT FOR ENGINE COOLANT LEAK

    Click here

  16. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  17. INSTALL FRONT BUMPER COVER LOWER

    Click here

  18. INSTALL V-BANK COVER

    Click here

  19. INSTALL UPPER RADIATOR SUPPORT SEAL

    Click here