THERMOSTAT REMOVAL

PROCEDURE


  1. REMOVE UPPER RADIATOR SUPPORT SEAL

    Click here

  2. REMOVE FRONT BUMPER COVER LOWER

    Click here

  3. REMOVE NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

    Click here

  4. DRAIN ENGINE COOLANT

    Click here

  5. REMOVE V-BANK COVER

    Click here

  6. DISCONNECT NO. 2 RADIATOR HOSE


    1. B001DN8

      Disconnect the No. 2 radiator hose.

  7. REMOVE WATER INLET WITH THERMOSTAT

    Tech Tips

    If the thermostat was not installed, cooling efficiency would decrease. Even if the engine tends to overheat, do not remove the thermostat.


    1. B001HXH

      Remove the 3 nuts, water inlet with thermostat and gasket.