DIFFERENTIAL PRESSURE SENSOR INSTALLATION

PROCEDURE


  1. INSTALL DIFFERENTIAL PRESSURE SENSOR


    1. A01XFNGE02
      Text in Illustration
      *a Paint Mark

      Install the 2 air hoses to the differential pressure sensor, and slide the 2 clamps to secure the 2 hoses.

      Tech Tips

      Make sure the paint mark of the air hose side the differential pressure sensor.

    2. Connect the 2 air hoses to the No. 1 vacuum pipe and No. 2 vacuum pipe, and slide the 2 clamps to secure the 2 hoses.

    3. Install the differential pressure sensor to the pipe clamp with the bolt.

      Torque:
      10 N*m  { 102 kgf*cm, 7 ft.*lbf }

    4. Connect the connector to the differential pressure sensor.

  2. INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY

    Click here